Canon imagePRESS 1135 Series Service Manual page 1506

9) Remove the 2 flat cables[1] from the connectors [2].
10) Remove the 4 cable clips [3].
CAUTION: Points to note when removing
Before plugging in the connector [3], secure the flat cables [1] with the cable clips [2].
[1] [2]
[1]
[3]
9
Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Removing the Deck Unit
[3]
[2]
F-9-186
[3]
[2]
F-9-187
9 Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Removing the Deck Unit
11) Remove the upper deck unit [1] to the direction of the arrow.
• 3 Screws [2]
CAUTION:Points to note when removing the unit
Fit the 2 cut-offs [2] of the upper deck unit [1] to the 2 hooks [3] on the guide rails.
[2]
[2]
[1]
9-89
[1]
[2]
[3]
[3]
F-9-188
[2]
F-9-189
9-89