Canon imagePRESS 1135 Series Service Manual page 1551

MEMO :
In case that the PCB cover of the DC controller
has been removed for service maintenance
reason, the cover may be deformed and the
screw hole position may not fit.
In that case, follow the below procedure from
step 32-1) to 32-9) and adjust the screw hole
position before installation.
32-2) Open the controller box.
• 2 screws
x2
9
Installation > Removable Hard Disk Kit-AA1 > Installation procedure
32-1) Remove the CP side cover.
• 5 screws
x5
9 Installation > Removable Hard Disk Kit-AA1 > Installation procedure
F-9-280
F-9-281
9-134
9-134