Canon imagePRESS 1135 Series Service Manual page 1251

COPIER > OPTION > USER
DK11PNTP M-Insert Upr-D punched ppr dble fd prev
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Multi Inserter Upper Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK10PNTP, DK12PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK12PNTP M-Insert Mid-D punched ppr dble fd prev
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Multi Inserter Middle Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK11PNTP, DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK13PNTP M-Insert Low-D punched ppr dble fd prev
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Multi Inserter Lower Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK12PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
VRQE2ECD Switch error proc: VREQ(VSYNC)error dtct
Lv.1 Details To switch whether to process it as an error code (E733-0010) or a
jam (0CFx) when it was detected that the engine kept rotating.
Use case When changing whether to handle as an error or a jam
Display/adj/set range 0 to 1
0: Display as a jam, 1: Display as an error
Default value 0
8-308
T-8-73
8-308