Canon imagePRESS 1135 Series Service Manual page 1391

SORTER> OPTION
SDL-PRS Press operatn in saddle stitcher: Fin-AF
Lv.1 Details To set the press operation in saddle stitcher
When wrinkle occurs, press operation is not executed.
If stack is bulky in saddle-stitching result with 21 sheets or more,
time to stop the press operation is extended.
Use case • When troubles (wrinkle etc) at press operation occur. Especially, in
the location of high-humid environment or thin paper is used
• In case of saddle-stitching with 21 sheets or more, if stack is bulky
due to the failure of folding accuracy
Adj/set/operate method 1) Enter the setting value and press OK.
2) Turn OFF/ON the main power switch.
Caution If wrinkle occurs at press operation, do not execute the press
operation.
Display/adj/set range 0 to 3
0: With press operation (one way only)
1: Without press operation
2: With press operation (both way)
3: Extend the time to stop the press operation in stack with 21 sheets
or more (one way only)
Default value 0
BUFF-SW ON/OFF of finisher buffer opertn: Fin-AF
Lv.1 Details To set ON/OFF of buffer operation in finisher.
Use case When the misalignment of paper stack occurs (either lowest 3 sheets
in side-stitching are displaced or center 3 sheets in saddle-stitching
are displaced.)
Adj/set/operate method Enter the setting value and press OK.
Caution When the buffer operation is set to OFF, productivity is decreased.
Display/adj/set range 0 to 2
0: ON, 1: OFF, 2: OFF (ON only at staple job)
Default value 0
TRY-EJCT Delivery control for thin paper: Fin-AF
Lv.1 Details To set the delivery control (delivery speed) for thin paper.
When this is specified, all the jobs are delivered in the thin paper
delivery speed regardless of media.
Use case When the stack failure of thin paper occurs
Adj/set/operate method 1) Enter the setting value and press OK.
2) Turn OFF/ON the main power switch.
Caution Priority is given to this setting over the upward curl mode setting in
CURL-SW.
Display/adj/set range 0 to 1
0: Normal, 1: Delivery control for thin paper
Default value 0
Related service mode SORTER> OPTION> CURL-SW
Supplement/memo Same setting can also be specified on the service-purposed DIP
switch on the finisher.
Same setting value is applied to the finisher side and the host
machine side.
8
Service Mode > SORTER > OPTION
8 Service Mode > SORTER > OPTION
SORTER> OPTION
PN-SKEW Pstn accuracy of punch hole: Fin-AF/AK
Lv.1 Details Set of punch hole position accuracy due to skew: Fin-AF/AK
To set the accuracy of punch hole when the punch hole is displaced
due to paper skew.
Use case If the punch hole is displaced by 2mm (approx) or more and also
skew appears on the paper fed to the finisher
Adj/set/operate method Enter the setting value and press OK key.
Caution As the greater value is set, skew is corrected more accurately;
however, productivity is decreased.
Display/adj/set range 0 to 2
0: Normal mode, 1: Skew tolerance increase mode,
2: Skew tolerance decrease mode
Default value 0
CNTNS-PT Set of continuous operation mode
Display/adj/set range 0 to 1
Default value 0
STK-MIX Set paper size mix mode at stk unit: stk
Lv.1 Details To set whether to allow or not the paper size mixed mode at the
stack unit of the stacker.
Use case When allowing the paper size mix mode on the stack unit
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Restrict mixed mode, 1: Allow mixed mode
Default value 0
MHPN-OHP Set of OHP forcible feed: P-Puncher
Lv.1 Details To set whether to feed forcibly the transparency at the professional
puncher.
Use case When allowing the feeding of transparency on the professional
puncher
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Forbid feeding, 1: Allow feeding
Default value 0
TBWRNLVL Set of blade rplce alarm times: P-Bind
Lv.1 Details To set the number of times of blade replacement alarm on the
Perfect Binder.
As the value is increased by 1, alarm is displayed 1000 times later.
Use case When adjusting the timing of blade replacement alarm on user basis
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 10 to 100
Unit 1000 times
Default value 40
8-448
8-448