Canon imagePRESS 1135 Series Service Manual page 1157

COPIER> FUNCTION> INSTALL
INIT-ITB Measure ITB sterring initial balance pnt
Lv.1 Details Measure and memorize the initial ITB steering cam position.
This item is used to make the initial setting after replacement of the
ITB or to correct ITB alignment after disengagement/engagement of
the ITB positioning plate.
Use case • To set the initial setting after replacement of the ITB
• To correct ITB alignment after disengagement/engagement of the
ITB positioning plate.
Adj/set/operate method Select the item and press the OK key.
Display/adjust/set range During operation: ACTIVE, When the operation finished normally:
OK, When the operation failed: NG
Default value 0
Required time Approx. 1 minute
Related user mode Operator maintenance mode > Adjustment/Cleaning > Initial setting
after replacement of ITB
TONER-S2 Toner supply to developing sleeve unit
Lv.1 Details Replenish the developing sleeve unit with toner.
This item is used when enough density is not acquired after the
machine is left unoperated for a long period of time.
Rotate the developing sleeve and stirring motor.
Use case At the time of replacement of the developing sleeve unit
Adj/set/operate method Select the item and press the OK key.
Caution When a failure occurs, the operations can be manually stopped by
pressing the OK key.
Display/adjust/set range During operation: ACTIVE, When the operation finished normally:
OK, When the operation failed: NG
Required time Approx. 1 minute
8
Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > CCD
T-8-47
8 Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > CCD
■ CCD
COPIER> FUNCTION> CCD
DF-WLVL1 White level adj in book mode: color
Lv.1 Details Automatically adjust the white level for copyboard scanning by
setting the paper which is usually used by the user on the copyboard
glass.
Use case • At the time of replacement of the copyboard glass
• At the time of replacement of the optical unit
• At the time of replacement of the reader controller PCB / clearing
of RAM data
Adj/set/operate method 1) Set paper on the copyboard glass.
2) Select the item and press the OK key.
Caution Be sure to execute DF-WLVL2 in a row.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> CCD> DF-WLVL2
COPIER> ADJUST> CCD> DFTBK-R, DFTBK-G, DFTBK-B
DF-WLVL2 White level adj in DADF mode: color
Lv.1 Details Automatically adjust the white level for DADF scanning by setting the
paper which is usually used by the user on the DADF.
Use case • At the time of replacement of the copyboard glass
• At the time of replacement of the optical unit
• At the time of replacement of the reader controller PCB / clearing
of RAM data
Adj/set/operate method 1) Set paper on the DADF.
2) Select the item and press the OK key.
Caution Be sure to execute this item after DF-WLVL1.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK!
Related service mode COPIER> FUNCTION> CCD> DF-WLVL1
COPIER> ADJUST> CCD> DFTAR-R, DFTAR-G, DFTAR-B,
DFTAR2-R, DFTAR2-G, DFTAR2-B, DFTAR-BW, DFTAR2BW,
DFTBK-R, DFTBK-G, DFTBK-B
8-214
8-214