Canon imagePRESS 1135 Series Service Manual page 1515

11) Fix the harness with 2 edge saddles.
Sheet
12) Aligning with the boss, tighten the screw that has been loosened in step 8).
13) Install the removed cover.
• copy board glass
• DF cable cover
• right retainer cover
14) Close the DADF.
15) Make sure that the environment switch is ON.
16) Insert the power plug to the outlet.
17) Turn the main power switch ON.
9
Installation > Reader Heater Kit-G1 > Installation Procedure
MEMO:
Check the sheet position.
F-9-207
9 Installation > Reader Heater Kit-G1 > Installation Procedure
Sheet
9-98
Sheet
F-9-208
9-98