Canon imagePRESS 1135 Series Service Manual page 1381

SORTER> ADJUST
PF-A4R41 Adj of A4R 4-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of A4R paper 4- fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 120
Unit 0.1 mm
Appropriate target value 0
Default value 0
PF-A4R42 Adj of A4R 4-fold position (2nd): PFU
Lv.1 Details Adjust the 2nd fold position of A4R paper 4- fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 55
Unit 0.1 mm
Appropriate target value 0
Default value 0
PFLTRR41 Adj of LTRR 4-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of LTRR paper 4- fold position of the
paper folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 120
Unit 0.1 mm
Appropriate target value 0
Default value 0
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
PFLTRR42 Adj of LTRR 4-fold position (2nd): PFU
Lv.1 Details Adjust the 2nd fold position of LTRR paper 4- fold position of the
paper folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 55
Unit 0.1 mm
Appropriate target value 0
Default value 0
PF-A4R21 Adj of A4R 2-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of A4R paper 2-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 55
56 to 120: Not used (When a value between 56 and 120 is entered,
the behavior will be same as the adjustment value of "55".)
Unit 0.1 mm
Appropriate target value 0
Default value 0
PFLTRR21 Adj of LTRR 2-fold position (1st): PFU
Lv.1 Details Adjust the 1st fold position of LTRR paper 2-fold position of the paper
folding unit.
Increase the input value by 1, the fold position will move by 0.1 mm.
+:
-:
Use case If the fold position adjustment in additional function mode is
inadequate
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range -128 to 55
56 to 127: Not used (When a value between 56 and 127 is entered,
the behavior will be same as the adjustment value of "55".)
Unit 0.1 mm
Appropriate target value 0
Default value 0
8-438
8-438