Canon imagePRESS 1135 Series Service Manual page 1509

6) Install the heater mount [1].
• 1 Connector [2]
• 2 Screws [3] ( Use the screws which is removed at step 1).)
[2]
x1
x2
7) Install the Deck Upper Front/ Middle Inner/ Lower Inner Covers, which were removed in the
previous step.
8) Install the deck unit, which was removed in the previous step.
9) Turn ON the heater switch.
9
Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Installing Cassette Heater Unit
[3]
[1]
9 Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Installing Cassette Heater Unit
9-92
9-92