Canon imagePRESS 1135 Series Service Manual page 1225

COPIER > OPTION > CUSTOM
FAN-ROT Set rotatn times of fan ctrl at shutdown
Lv.2 Details Set the number of times the fan rotates at shutdown sequence (last
exhaust mode).
This item is only used for the fixing assembly exhaust fan 2 (FM9)
and fixing duct suction fan (FM25).
Operation time differs depending on the value specified in FAN-
TIME.
0 (auto control): FAN-TIME is set to 0 or 1 -> 60min, 2 -> 80min
1 (full speed): FAN-TIME is set to 0 -> 61min, 1 -> 40min, 2 -> 80min
2 (half speed): Regardless of FAN-TIME, it is 80min.
Use case - To support noise complaint
- In the case of adjustment request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 3
0: Automatic control, 1: Full speed, 2: Half-speed, 3: Reserve
Default value 0
Related service mode COPIER> OPTION> FEED-SW> FAN-TIME
DEV-SP1 Device special settings 1
Lv.2 Details To execute the device special settings 1.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP2 to SP8
DEV-SP2 Device special settings 2
Lv.2 Details To execute the device special settings 2.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP1, SP3 to SP8
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CUSTOM
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CUSTOM
COPIER > OPTION > CUSTOM
DEV-SP3 Device special settings 3
Lv.2 Details To execute the device special settings 3.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP1, SP2, SP4 to SP8
DEV-SP4 Device special settings 4
Lv.2 Details To execute the device special settings 4.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP1 to SP3, SP5 to SP8
DEV-SP5 Device special settings 5
Lv.2 Details To execute the device special settings 5.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP1 to SP4, SP6 to SP8
DEV-SP6 Device special settings 6
Lv.2 Details To execute the device special settings 6.
Use case When specific instructions are given from the Quality Support
Division
Adj/set/operate method Enter the setting value, and then press OK key.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Default value 00000000
Related service mode COPIER> OPTION> CUSTOM> DEV-SP1 to SP5, SP7, SP8
8-282
8-282