Canon imagePRESS 1135 Series Service Manual page 1224

■ CUSTOM
COPIER > OPTION > CUSTOM
CCD-TYPE Setting of CCD unit type
Lv.2 Details Setting the type of CCD unit in the reader to the backup area of the
controller.
The controller switches the image processing table according to the
setting value.
Use case When changing the type of CCD unit.
Adj/set/operate method 1) Enter the setting value, and then press OK key
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Original (initial) type, 1: Modified type
Default value 0
Supplement/memo The reader cannot recognize the type if the CCD unit is changed
after the factory shipment.
SC-L-CNT Large paper judge reference at scanning
Lv.1 Details Setting the judgment reference of the scan counter as to which to
use B4 or LTR to determine large size.
The threshold is determined by the combination with the setting of
B4-L-CNT.
SC-L-CNT=0, B4-L-CNT=0: paper exceeding B4 is determined as
large size, paper with B4 or smaller is determined as small size.
SC-L-CNT=0, B4-L-CNT=1: paper with B4 or larger is determined as
large size, paper smaller than B4 is determined as small size.
Use case As needed basis
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: B4 size, 1: LTR size
Default value 0
Related service mode COPIER> OPTION> USER> B4-L-CNT
FACT-DEF Set of batch change of factory setting
Lv.2 Details For individual measure, set the batch change of factory setting.
Display/adj/set range 0 to 1
Default value 0
MAILYEAR Atmtic add stg of email sbjct/file name
Lv.2 Details Setting whether to automatically add year/month/date, time, allotted
number in the last of the character strings of the Subject/File name
of e-mail.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: following the current mode, 1: addition of the item
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CUSTOM
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CUSTOM
COPIER > OPTION > CUSTOM
BOX-BKUP Allow/forbit to restore box backup data
Lv.1 Details Setting whether to permit restore of box backup data
You can select either the same model or the succeeding model (by 1
generation) as a target model.
The setting value is put back to 0 once restore is properly complete.
Use case When replacing the device, permit restore of the backup data of the
other model (a part of the model).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Permit restore from the own device to the own device only (the
same model only)
1: Permit restore from the old device to the new device only (1
generation-succeeding model only)
Default value 0
PDLEVCT1 Set event skipping at PDL continuous job
Lv.2 Details Setting for event skipping at the time of PDL continuous job.
During continuous operation, processing performance can drop due
to the other event generated by the event in operation. In such case,
skipping of the event can prevent drop of processing performance.
As for processing performance: No event skipping < skipping target 1.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: No event skipping, 1: Skipping target 1
Default value 0
ABK-TOOL Allow access from address book MTC tool
Lv.1 Details Setting whether to accept import from the Address Book maintenance
tool.
Use case When executing import from the Address Book maintenance tool.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Disable, 1: Enable (permit)
Default value 0
Supplement/memo Address Book maintenance tool: the tool provided from CMJ.
8-281
8-281