Canon imagePRESS 1135 Series Service Manual page 1250

COPIER > OPTION > USER
DK7-PNTP Sec PD Low punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD Lower Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK6-PNTP, DK8-PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK8-PNTP Sec PD2 Upr punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD 2 Upper Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK7-PNTP, DK9-PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK9-PNTP Sec PD2 Mid punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD 2 Middle Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK8-PNTP, DK10PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK10PNTP Sec PD2 Low punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD 2 Lower Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK9-PNTP, DK11PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8-307
8-307