Canon imagePRESS 1135 Series Service Manual page 1219

COPIER > OPTION > NETWORK
NS-PLN Limit plaintext auth in SMTPauth noencry
Lv.2 Details Under the environment in which the communication packet is not
encrypted, restricting use of PLAIN/LOGIN authentication, which is
plain text authentication, at the time of SMTP authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
NS-LGN Limit LOGIN authentication in SMTP auth
Lv.2 Details Restricting use of LOGIN authentication at the time of SMTP
authentication.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: the protocol in which user authentication
function is added to SMTP, which is the protocol to be used
for e-mail transmission. At the time of e-mail transmission, this
protocol executes authentication of the user account and the
password between the SMTP server and the user to approve e-mail
transmission only when it's authenticated.
MEAP-PN HTTP port setting of MEAP application
Lv.2 Details Setting of HTTP port number with MEAP application.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Do not specify port 8080 when a PS unit is connected. Otherwise,
you cannot browse the device RUI in which MEAP application is
running (Port 8080 is reserved for redirect of EFI controller with iR
side.)
Display/adj/set range 0 to 65535
Default value 8000
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
COPIER > OPTION > NETWORK
SSH-SW ON/OFF of SSH server function
Lv.2 Details ON/OFF setting of SSH server function.
Use case As needed basis (this mode is used for the Japanese models only
and not used with overseas models (outside Japan).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Supplement/memo SSH: Secure Shell. Program to login to other PC, execute command
from a remote PC, or move file to other PC through network. A line of
operations can be safely performed even through internet because
the data running on the network is encrypted.
RMT-LGIN Setting of remote login to SSH server
Lv.2 Details Setting to enable/disable remote login from the remote host (SSH
client: DA) to the debug console of SSH server.
Use case As needed basis (this mode is used for the Japanese models only
and not used with overseas models (outside Japan).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution This setting is active when the setting value of SSH-SW is ON.
Display/adj/set range 0 to 1
0: Disable, 1: Enable
Default value 0
Related service mode COPIER> OPTION> NETWORK> SSH-SW (Level 2)
Supplement/memo DA: Digital Accessory
RE-PKEY Setting of SSH server key regeneration
Lv.2 Details Setting whether to regenerate SSH server pair key at the start of
host machine.
With the setting to regenerate, SSH server host regenerates the
pair key (secret key/public key) and then output to the key file to be
saved in HDD.
Use case As needed basis (this mode is used for the Japanese models only
and not used with overseas models (outside Japan).
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution - This setting is enabled when the setting value of SSH-SW is ON.
- The start of the host machine can take approximately 3 to 4
minutes longer because the regenerating process takes time.
Display/adj/set range 0 to 1
0: No regeneration, 1: Regenerate
Default value 0
Related service mode COPIER> OPTION> NETWORK> SSH-SW (Level 2)
8-276
8-276