Canon imagePRESS 1135 Series Service Manual page 1206

■ CLEANING
COPIER > OPTION > CLEANING
W-CLN-P Last rotation smpl wire clean intrvl stg
Lv.2 Details Setting the sheet-to-sheet interval for automatic cleaning of the
primary charging wire.
The primary charging wire is cleaned for 1 round trip at the time of
post rotation after completion of job with every specified number of
sheets.
1 increment of the value increases 500 sheets for the sheet-to-sheet
interval. When "0" is set, cleaning is not executed.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 255
0: No execution
Unit 500 sheets
Default value 4
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ENV-SET
T-8-68
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > ENV-SET
■ ENV-SET
COPIER > OPTION > ENV-SET
ENVP-INT Set interval to get inside temp&humid
Lv.1 Details Setting the cycle to obtain log of the temperature and humidity inside
the machine/surface temperature of the fixing roller.
1 increment of the value increases the cycle by 1 min.
Obtained log can be displayed by selecting the following: COPIER>
DISPLAY> ENVRNT
Use case At the time of trouble analysis.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 480
Unit 1 minute
Default value 60
Related service mode COPIER> DISPLAY> ENVRNT
DRY-CISU Condensation mode ON/OFF
Lv.1 Details ON/OFF setting of condensation mode.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-263
T-8-69
8-263