Canon imagePRESS 1135 Series Service Manual page 1184

COPIER > OPTION > DSPLY-SW
RMT-CNSL ON/OFF of MEAP console screen
Lv.1 Details Selecting ON enables to obtain log for Function Composer on
console screen.
Use case When obtaining log for Function Composer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
SW-SKEW Switch at input skew off-spec detection
Lv.2 Details Switch the setting of alarm/jam when the input skew is out of
standard.
Set this item to 0 to set "alarm", and to 1 to set "jam".
When an alarm frequently occurs due to a failure in paper loading to
the compartment, the setting is switched to "jam".
Use case Upon request from the user
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Alarm, 1: Jam
Default value 0
SW-Y-REG Switch at input side regi off-spec detct
Lv.2 Details Switch the setting of alarm/jam when the input horizontal registration
is out of standard.
Set this item to 0 to set "alarm", and to 1 to set "jam".
When an alarm frequently occurs due to a failure in paper loading to
the compartment, the setting is switched to "jam".
Use case Upon request from the user
Display/adj/set range 0 to 1
0: Alarm, 1: Jam
Default value 0
SW-T-REG Switch at input lead regi off-spec detct
Lv.2 Details Switch the setting of alarm/jam when the input leading registration is
out of standard.
Set this item to 0 to set "alarm", and to 1 to set "jam".
When an alarm frequently occurs due to a failure in paper loading to
the compartment, the setting is switched to "jam".
Use case Upon request from the user
Display/adj/set range 0 to 1
0: Alarm, 1: Jam
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > DSPLY-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > DSPLY-SW
COPIER > OPTION > DSPLY-SW
SDTM-DSP Display/hide of auto shutdown time
Lv.1 Details To set whether to display "Auto Shutdown Time" in user mode.
Use case Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When "Hide" is set, auto shutdown time is reset. (Auto shutdown is
not performed.)
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related UI menu Settings/Registration> Preferences> Time/Energy Settings> Auto
Shutdown Time
8-241
T-8-61
8-241