Related Manuals for Canon imagePRESS 1125 Professional
Summary of Contents for Canon imagePRESS 1125 Professional
- Page 1 1125 Professional Customer Expectations Document Version 3 Systems & Technical Support Division Imaging Systems Group, Canon U.S.A., Inc.
-
Page 2: Table Of Contents
Contents 1. Introduction ......................4 2. Product Overview ....................5 Summary of Functions ..................6 Offset Press vs. Digital imagePRESS ............. 6 Image Stabilization Control ................7 Professional Input/Output Accessories ............7 3. Machine Dimensions and Space Requirements ..........8 Dimensions ..................... - Page 3 System Upgrade RAM .................. 43 Additional Memory Type C (512 MB) ............43 IPSec Board ....................43 Color Universal Send Kit ................43 Universal Send Security Feature Set-C1............44 Universal Send Advanced Feature Set-C1 ........... 44 7.10 Digital User Signature Kit-B1 ................. 44 7.11 Secure Watermark-A1 ...................
-
Page 4: Introduction
The information included in this document has been pulled from various sources, including product reference guides, service guides, user manuals, as well as results from internal Canon testing. Specifications and other information contained herein may vary slightly from actual device values or those found in advertising and other printed matter. -
Page 5: Product Overview
Product Overview The Canon imagePRESS 1125P brings the following new capabilities to the production printing environment: • Class Leading Image Quality – 1,200 x 1,200 dpi print resolution and an innovative twin sleeve developing system delivers sharp text and images. -
Page 6: Summary Of Functions
2.1 Summary of Functions Function imagePRESS 1125P Output Speed (B&W) 125 ppm (LTR) Engine Resolution 1,200 x 1,200 dpi Gradations 256 levels 7.17” x 7.17” Media Size 13” x 19.2” Media 14 lb bond (52 g/m²) Thickness 110 lb cover (300 g/m²) HDD Capacity 80 GB Main Controller 1:... -
Page 7: Image Stabilization Control
2.3 Image Stabilization Control The imagePRESS 1125P contains four separate skew adjustment rollers which ensure that an image is placed in the same location on every sheet of paper. Accurate front to back registration is actively adjusted during print runs, and consistency is maintained at high speeds with non-stop operation. -
Page 8: Machine Dimensions And Space Requirements
Machine Dimensions and Space Requirements 3.1 Dimensions The following table includes the width, height, and depth dimensions (in inches and millimeters) of the main unit and optional accessories. Unit Width Depth Height Main Unit 54.6” 1,387 mm 31.9” 809 mm 54.1”... -
Page 9: Weight
3.2 Weight The weights of the main unit, feeding and finishing options (in pounds and kilograms) are listed in the table below. Unit Weight Main Unit 1,103 lb 500 kg POD Deck-C1 498 lb 226 kg Secondary POD Deck-C1 498 lb 226 kg Color Image Reader-L1 w/Feeder 88 lb... -
Page 10: Minimum Space Requirements To Transport The Machine And Turn Hallway Corners
3.3.1 Minimum Space Requirements to Transport the Machine and Turn Hallway Corners The following table represents the minimum width that is necessary to turn hallway corners and transport the machine to its final installation site. IMPORTANT • The minimum doorway opening that the machine passes through prior to installation must be at least 36”... -
Page 11: Dimensions Diagrams
3.3.2 Dimensions Diagrams Approx. 31.9" Provide at least 3 feet on each side of the machine for unrestricted operation and for proper servicing. Approx. 54.1" Approx. 40.9" Approx. Approx. Approx. Approx. Approx. Approx. Approx. Approx. Approx. 95.6” 13.2” 39.3” 36.3” 39.3”... -
Page 12: Installation Space Diagrams
3.3.3 Installation Space Diagrams The approximate installation space requirements will differ, depending on how your machine is configured and the optional accessories attached. There must be enough space around the machine. The following diagrams show the minimum dimensions; whenever possible, be sure there will be more space than indicated. Minimum Configuration 144.7”... - Page 13 Maximum Configuration 39.4” 456.6” 39.4” [1] Main Unit [8] High Capacity Stacker-E1 [2] POD Deck-C1 [9] High Capacity Stacker-E1 [3] Secondary POD Deck-C1 [10] Perfect Binder-C1 [4] Secondary POD Deck-C1 [11] Paper Folding Unit-F1 [5] Multi Drawer Document Insertion Unit-A1 [12] Saddle Finisher-AF2 [6] Professional Puncher-B1 [13] Booklet Trimmer-D1...
-
Page 14: Recommended Floor Space Requirements
3.4 Recommended Floor Space Requirements For a fully configured imagePRESS 1125P (3-POD Decks-C1, the Main Unit, Multi-Drawer Document Insertion-A1, Professional Puncher-B1 and Professional Puncher Integration Unit-A1, Perfect Binder-C1, 2-High Capacity Stackers-E1, Paper Folding Unit-F1, Saddle Finisher-AF2, Booklet Trimmer-D1, Two-Knife Booklet Trimmer-A1, and imagePRESS Server J200/J100 with the Integrated Interface &... -
Page 15: Network Connectivity
3.6 Network Connectivity A standard 10/100Base-T Ethernet interface (RJ-45 jack) for device installation, monitoring, and Mail Box access, via the Remote UI, ships standard with all configurations. A USB 2.0 High-Speed interface port ships standard with all configurations for direct connection to centralized environments that want to drive all jobs through a single host PC. -
Page 16: Power Requirements For The Main Unit And Optional Accessories
4.1 Power Requirements for the Main Unit and Optional Accessories Power Supply Cord/Plug Length of Part or Accessory Power Supply Specifications Power Cord 1-Single Phase 9’ 8” (3 m) NEMA L14-30 208 V/30 A outlet Main Unit 6’ (1.8 m) 1-208 V/15 A outlet NEMA 6-15 NEMA 5-15... - Page 17 IMPORTANT • Canon USA strongly recommends that dedicated and properly grounded outlets be provided for the devices mentioned above. The ground connection serves to provide the internal electronics with a reference voltage. Faulty or poor ground sources will cause this reference voltage to fall into a range that no longer serves as a reliable reference voltage.
-
Page 18: Environmental Factors And Requirements
Environmental Factors and Requirements Optimum Temperature Range: Between 68°F (20°C) and 80.6°F (27°C)* Optimum Humidity Range: Between 30% and 70% Atmospheric Pressure: 810.6 to 1,013 hPa (0.8 to 1.0 atm) Noise (sound level): Standby: 68 dB; Operating: 83 dB Ozone Emissions: 0.01 ppm (parts per million) or less (initial startup) 0.35 ppm or less (after a short break-in period) * If your machine is operated in a low temperature... -
Page 19: Operating The Machine In A Low Temperature Environment
5.1.1 Operating the Machine in a Low Temperature Environment It is best to run your machine at a room temperature that falls within the optimal range (68°F to 80.6°F (20°C to 27°C)); however, if a low temperature environment cannot be avoided, and depending on your job criteria (either print speed or image quality), you can set the machine to account for the temperature of the room in which the machine is located. -
Page 20: Temperature Gradient
5.2 Temperature Gradient Using an air conditioner during the winter, or if a sudden temperature change occurs, may have an adverse affect on image positioning. Sudden temperature changes may cause the paper to bend or contract, cause the machine to malfunction, and form condensation. -
Page 21: Specifications
This chapter explains the specifications and any productivity impacts involving the main unit and optional accessories. Specifications are subject to change without notice for product improvement or future release. 6.1 Main Unit Item Specifications Name Canon imagePRESS 1125P Type Console Printing Method Electronic Photography Color Supported Black-and-White Engine Resolution... - Page 22 Main Unit Table Continued Item Specifications Direct (sheets/minute) 13" x 19" Approximately 67 sheets/minute 12" x 18" Approximately 70 sheets/minute 12 5/8” x 17 3/4” Approximately 71 sheets/minute Copy Speed 11" x 17" Approximately 74 sheets/minute (20 lb bond (80 g/m Approximately 86 sheets/minute Approximately 125 sheets/minute LTRR...
-
Page 23: Color Image Reader-L1 With Feeder
6.3 Color Image Reader-L1 with Feeder The optional Color Image Reader-L1 with Feeder enables you to scan hard-copy documents to create a digital archive. The color image reader scans in color, and the feeder is extremely productive, since it can scan both sides of an original at the same time. - Page 24 Color Image Reader-L1 with Feeder Table Continued Item Specifications Regular paper size: Same Ratio Reduction 1:0.78 (LGL ➞ LTR) 1:0.73 (11" x 17" ➞ LGL, 11" x 15" ➞ LTR) 1:0.64 (11" x 17" ➞ LTR) 1:0.50 (11" x 17" ➞ STMT) Magnification 1:0.25 Enlargement...
-
Page 25: Pod Deck-C1/Secondary Pod Deck-C1
6.4 POD Deck-C1/Secondary POD Deck-C1 You can attach up to three POD Decks to the machine (at least one POD Deck must be attached). When all three POD Decks are attached to the machine, you have a maximum of nine paper sources that can be used for jobs and a maximum capacity of 14,000 sheets of paper. -
Page 26: Multi Drawer Document Insertion Unit-A1
6.5 Multi Drawer Document Insertion Unit-A1 The optional Multi Drawer Document Insertion Unit-A1 provides an additional three paper sources for sheet insertions and cover sheets. The upper and middle decks can hold up to 1,000 sheets (20 lb bond (80 g/m )) and the lower deck can hold up to 2,000 sheets (20 lb bond (80 g/m IMPORTANT... -
Page 27: Professional Puncher-B1 And Professional Puncher Integration Unit-A1
6.6 Professional Puncher-B1 and Professional Puncher Integration Unit-A1 The optional Professional Puncher-B1 and Professional Puncher Integration Unit-A1 provide you with a variety of punching patterns. The punching patterns are available as die sets. The die sets are interchangeable and enable you to create off-line plastic spiral bound books. -
Page 28: Finisher-Af1
6.7 Finisher-AF1 The optional Finisher-AF1 is equipped with the Collate, Group, Offset, and Staple modes. The Finisher-AF1 and Saddle Finisher-AF2 cannot be attached to the machine at the same time. Item Specifications Size: 13" x 19", 12" x 18", 12 5/8” x 17 3/4”, 11" x 17", LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (7 1/8"... - Page 29 Finisher-AF1 Table Continued Item Specifications No Collating, Collate, or Group Mode Tray A: If the High Volume Stack Mode is set to ‘Off’: 13" x 19", 12" x 18", 12 5/8” x 17 3/4”, 11" x 17", LGL, LTR, LTRR, EXEC, EXECR: 1,000 sheets (or 5 3/4"...
- Page 30 Finisher-AF1 Table Continued Item Specifications When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.) LTR, EXEC: 100 sheets (20 lb bond (80 g/m )) or Heavy paper stacked less than 1/2"...
-
Page 31: Saddle Finisher-Af2
6.8 Saddle Finisher-AF2 The optional Saddle Finisher-AF2 is equipped with the Collate, Group, Offset, Staple, and Saddle Stitch modes. The Saddle Finisher can also V-fold up to five sheets without stapling. The Saddle Finisher-AF2 and Finisher-AF1 cannot be attached to the machine at the same time. - Page 32 Saddle Finisher-AF2 Table Continued Item Specifications No Collating, Collate, or Group Mode Tray A: If the High Volume Stack Mode is set to ‘Off’: 13" x 19", 12" x 18", 12 5/8” x 17 3/4”, 11" x 17", LGL, LTR, LTRR, EXEC, EXECR: 1,000 sheets (or 5 3/4"...
- Page 33 Saddle Finisher-AF2 Table Continued Item Specifications When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.) LTR, EXEC: 100 sheets (20 lb bond (80 g/m )) or Heavy paper stacked less than 1/2"...
-
Page 34: Punch Unit-Bb1
6.9 Punch Unit-BB1 The optional Punch Unit-BB1 can be installed inside the optional Finisher-AF1 or Saddle Finisher-AF2, and can punch two to three holes (depending on the paper size). Item Specifications Size: 11" x 17", LGL, LTR, LTRR, EXEC, or EXECR Weight: 14 lb bond to 73 lb cover (52 to 200 g/m Paper Size/Weight/Type Type: Thin, Plain, Heavy, Recycled, Color, Bond Paper, Tab Paper, Coated,... -
Page 35: Paper Folding Unit-F1
6.10 Paper Folding Unit-F1 The optional Paper Folding Unit-F1 enables you to Z-fold, C-fold, Accordion Z-fold, and Double Parallel-fold paper for businesses that require letters, invoices, or brochures to be folded. The Paper Folding Unit must be attached to the optional Finisher-AF1 or Saddle Finisher-AF2. -
Page 36: Card Reader-C1
6.11 Card Reader-C1 The optional Card Reader-C1 automatically performs Department ID Management, and you do not have to enter the Department ID and password manually. You can also check the print totals and the remaining number of pages that can be printed on the touch panel display. -
Page 37: High Capacity Stacker-E1
6.12 High Capacity Stacker-E1 The optional High Capacity Stacker-E1 enables you to stack up to 5,000 sheets of large size paper, or 10,000 sheets of LTR size paper. There is also a 1,000 sheet capacity proof tray located on top of the stacker. Connect up to two stackers to which up to 27,000 sheets of LTR size paper can be output. -
Page 38: Perfect Binder-C1
The perfect binder uses hot glue technology and three-sided trimming to produce a nicely finished product. Canon U.S.A., Inc. recommends that you use imageWARE Prepress Manager for in-line perfect binding to create books, and easily design the spine of a book. -
Page 39: Booklet Trimmer-D1
Perfect Binder-C1 Table Continued Item Specifications Approximately 0.8 lb (380 g) (Enough for approximately 135 booklets Glue Capacity containing 100 bound sheets of 20 lb bond (80 g/m ) paper) 10 books containing 100 body pages (17 lb bond (64 g/m ) and one cover Tray Capacity sheet (32 lb bond (128 g/m... -
Page 40: Two-Knife Booklet Trimmer-A1
6.15 Two-Knife Booklet Trimmer-A1 If the optional Two-Knife Booklet Trimmer-A1 is attached to the optional Booklet Trimmer-D1, you can trim the fore edge and top/bottom edges of saddle stitched prints for neat output. Item Specifications Description Upper knife, reciprocating top-bottom trimmer Maximum Number of 100 sheets (20 lb bond (80 g/m Sheets... -
Page 41: System Options
System Options You can expand the functionality of your imagePRESS 1125P by installing system related optional accessories. This section describes the system related optional accessories and their functions. 7.1 imagePRESS Printer Kit The imagePRESS Printer Kit supports the PCL and PostScript printing solutions. It also enables you to print TIFF, JPEG, PDF, and PS files directly from your PC using the Remote UI. -
Page 42: Imagepress Server J200/J100
PCL5 imagePRESS Server A1100 Equivalent to imagePRESS Server-Q2 New Hardware Platform imagePASS GX200 Canon iPR Server-J100-200 Ver1.0 (PS3) Driver’s Name Canon iPR Server-J100-200 PCL5e (PCL5e) Canon iPR Server-J100-200 PCL6 (PCL6) • VDP Enablement Kit • VDP Enablement Kit • Integrated Interface & Stand Kit •... -
Page 43: Pci Bus Expansion Kit
7.3 PCI Bus Expansion Kit The PCI Bus Expansion Kit is necessary to install the IPSec Board. 7.4 System Upgrade RAM The System Upgrade RAM expands the memory capacity of the machine, and enables you to specify more functions for scanning and sending documents. The System Upgrade RAM is required if you want to scan a color document in 600 dpi. -
Page 44: Universal Send Security Feature Set-C1
7.8 Universal Send Security Feature Set-C1 The Universal Send Security Feature Set-C1 enables you to encrypt PDF files and set a password to send them safely to a file server or e-mail address. It also enables the recipient of the PDF file to verify which device scanned it. NOTE To enable the functions of the Universal Send Security Feature Set-C1, it must be activated by registering a license key after the optional Color Universal Send... -
Page 45: Hdd Data Erase Kit-A1
7.13 HDD Data Erase Kit-A1 The HDD Data Erase Kit-A1 enables you to erase the data stored on the hard disk completely. 7.14 Encrypted Secure Print Software The Encrypted Secure Print Software enables you to encrypt print data sent from a computer using the Secured Print function and decrypt it at the machine. -
Page 46: Notes On The Hard Disk
7.19 Notes on the Hard Disk Do not turn the machine OFF via the power switch. Turning the machine OFF via the power switch may negatively impact the performance and life of the drive. Make sure to use the Control Panel Power Switch on the operating console to turn OFF the machine properly. -
Page 47: Customer Responsibilities
The table below indicates the estimated length of time needed to install the main unit and optional accessories from the time the machine is unpacked to when it is installed, and calculated from the average amount of manpower hours. The estimated installation times are based on four (4) experienced technicians. -
Page 48: Consumable Items
Consumable Items Consumable items are all products and materials that are consumed with regular use and cannot be reused. Such consumables are included but not limited to paper, chemicals, and toner. A number of factors go into the approximate life expectancy of a consumable item, including paper size and the amount of coverage per page. -
Page 49: Consumable Parts
Therefore, consumable parts do not have a warranty, and Canon U.S.A., Inc. cannot guarantee a minimum life. NOTE All consumable parts shown in the table below are for reference purposes only, and are subject to change without notice. -
Page 50: Waste Toner Yields
• If the machine is maintained and serviced by a Canon authorized service technician • If only Genuine Canon service and consumable parts are used... -
Page 51: Optimum Monthly Product Performance
13. Optimum Monthly Product Performance The table below describes the differences between the optimum PCV (Print Copy Volume), average PCV, maximum PCV, and duty cycle. Please note that the numbers in the table are for reference purposes only, and depend strongly on the type of media selected and environmental conditions. -
Page 52: Machine Reliability And Productivity
• Your installation and operating environment meets the specifications detailed in this document and other Canon service documentation. • Service is provided by a Canon authorized service technician. • Single sided, uncoated; letter size sheets (20 lb bond (80 g/m )) are used. -
Page 53: Print Speed
14.1 Print Speed One of the key features of the imagePRESS 1125P is its print speed technology. The imagePRESS 1125P prints a letter-sized sheet of bond paper weighing 14 lb bond (52 g/m²) at 125 ppm. Also, the same sized sheet (single sided) at 110 lb cover (300 g/m²) prints at 125 ppm. - Page 54 Print Speed Table (2 of 3) Productivity (ppm) Coated Paper 1 Coated Paper 2 Coated Paper 3 Mode Size Texture Paper 14 to 24 lb bond 24 to 32 lb bond 32 to 35 lb bond (52-90 g/m (91-120 g/m (121-128 g/m LTR-Tab EXEC...
- Page 55 Print Speed Table (3 of 3) Productivity (ppm) Coated Paper 5 Coated Paper 6 Coated Paper 4 Mode Size 40 lb bond to 110 lb index to 35 to 40 lb bond 110 lb index 90 lb cover (129-150 g/m (151-199 g/m (200-240 g/m LTR-Tab...
-
Page 56: Mixed Paper Weight Job Productivity
14.2 Mixed Paper Weight Job Productivity The imagePRESS 1125P is capable of processing jobs that contain paper with different paper weights. However, during the processing of jobs with mixed paper weights, the machine adjusts its fixing temperature, resulting in a slight processing delay. -
Page 57: Paper, Toner, And Waste Toner Replacement
14.4 Paper, Toner, and Waste Toner Replacement The imagePRESS operator can maintain productivity by removing, replacing, and refilling the paper, toner, and waste toner while the machine is running. The paper trays can also be opened and refilled during operation. The tray that is being used by the machine during production, however, will be locked. -
Page 58: Media Usage/Compatibility
15. Media Usage/Compatibility The imagePRESS 1125P maintains reliable, predictable, and high-quality output. Consistency of the output is dependent on knowing and compensating for variables of a print job. The imagePRESS 1125P incorporates many control systems which compensate for environmental and print process conditions. Another variable is the print media. -
Page 59: Paper Handling And Storage
To obtain the Specialty Media Handling Guide for the imagePRESS 1125P, please contact your local authorized Canon dealer. Canon U.S.A., Inc. also publishes a Paper Orientation and Driver Setting Guide. The Paper Orientation and Driver Setting Guide includes information on how to place and orient your paper in the correct way to achieve your desired finishing results. -
Page 60: Paper Grain And Curl
15.4 Paper Grain and Curl Paper grain and curl can dramatically affect the reliability of machines utilizing an electrostatic process like the imagePRESS 1125P. Paper used in an offset press is usually cut for short edge feeding. This type of paper is not as reliable as paper made for machines utilizing an electrostatic process, which is cut for long edge feeding. -
Page 61: Note For Customers Who Cut Their Own Paper
15.6 Media Feed Locations As with all Canon copiers, certain feed locations within the device are capable of feeding specific media sizes and weights. When considering media, make sure the media is within the proper size and weight parameters of the feed location. - Page 62 The default paper types registered in the machine are shown in the table below. : Available - : Unavailable Paper Source POD Deck- Paper Decks of the Main Multi Drawer Document C1/Secondary POD Paper Type Unit Insertion Unit-A1 Deck-C1 (Paper Weight) (14 lb bond to...
- Page 63 Default Paper Types Table Continued : Available - : Unavailable Paper Source POD Deck- Paper Decks of the Main Multi Drawer Document C1/Secondary POD Paper Type Unit Insertion Unit-A1 Deck-C1 (Paper Weight) (14 lb bond to (14 lb bond to (14 lb bond to 110 lb cover 110 lb cover...
- Page 64 Default Paper Types Table Continued : Available - : Unavailable Paper Source Paper Decks of the Main POD Deck-C1/Secondary Multi Drawer Document Paper Type Unit POD Deck-C1 Insertion Unit-A1 (Paper Weight) (14 lb bond to (14 lb bond to (14 lb bond to 110 lb cover 110 lb cover...
-
Page 65: Paper Sizes And Feed Location Chart
15.7 Paper Sizes and Feed Location Chart The table below represents the available paper sizes and feed locations. The POD Decks and Multi Drawer Document Insertion Unit are optional. : Available - : Unavailable Paper Source POD Deck-C1 Multi Drawer Paper Size Width x Length Paper Decks of... -
Page 66: Image Quality Capabilities
‘1,200 x 1,200 dpi’. However, if you want to perform transactional printing or print from the Canon PS printer driver, and the profile is set to ‘Default Settings’, you must manually change the machine’s default printing resolution from ‘600 dpi’... -
Page 67: Customer-Defined Image Quality Adjustments And Recommendations
Image Quality Expectations Table Continued Item Equipment Capability Comment Image quality is consistent throughout the Consistency/Stability document, and from one document to another. Extreme high-humidity Line Quality Even and fine lines can be reproduced. conditions can lead to the break up or blurriness of lines. Extreme high-humidity Black Reproduction Blacks are well saturated without mottling. -
Page 68: Device Management Settings
16.1.1 Device Management Settings The Device Management Settings mode is for customers who want to make fine adjustments to the printed image. There is a special menu that must be activated by your authorized service dealer for you to be able to access the Device Management Settings modes. -
Page 69: Paper Type Management Settings
16.1.2 Paper Type Management Settings The Paper Type Management Settings mode is for customers who want to precisely adjust the image quality and front-to-back registration per irregular paper type that is registered in the machine. There is a special menu that must be activated by your authorized service dealer for you to be able to access the Paper Type Management Settings modes. -
Page 70: Responsibility Matrix
17. Responsibility Matrix Responsibility Action Customer Dealer Ensure adequate space and power to properly install the machine. Verify floor strength and level. Ensure that the equipment can be delivered to the site, and that the path is clear and unobstructed. Unpack all delivered items.