Canon imagePRESS 1135 Series Service Manual page 1255

■ INT-FACE
COPIER> OPTION> INT-FACE
IMG-CONT Connection setting of print server
Lv.1 Details Setting connection with print server.
Use case At the time of installation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 5
0: Normal operation
1: Use with Pinatubo/Hood (Network setting mask)
2: Use with AHT/TR
3: Yukon model (Network setting mask other than e-mail/LDAP)
4: Use with Pinatubo/Hood
5: RIPA model
Default value 0
AP-OPT Output setting for app with print servr
Lv.2 Details Setting whether to permit output from the application (PrintMe)
equipped with print server.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: Permit the specified account only, 1: Permit, 2: Permit the
specified department ID only
Default value 0
AP-ACCNT Job dept ID set for app with print sertr
Lv.2 Details Setting department ID to the print job from the application (PrintMe)
equipped with print server.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 9999999
Default value 0
AP-CODE Set output pass code from print server
Lv.2 Details Setting the path code for output from print server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 9999999
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > INT-FACE
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > INT-FACE
COPIER> OPTION> INT-FACE
NWCT-TM Timeout setting of network connection
Lv.2 Details Setting the time to keep network connection between this machine
and the PC application (keep-alive setting).
1 increment of the value increases the time by 1 minute.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 1 to 5
Unit 1 minute
Default value 5
Supplement/memo PC application expected to use this mode: Network print application,
E-mail function, additional remote, MEAP network application, etc.
CNT-TYPE Connection setting of print server
Lv.1 Details Switch of connecting print server
Specify print server with EFI controller ID.
Use case When a print server is installed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 1 to 999
Default value 1
8-312
T-8-76
8-312