Canon imagePRESS 1135 Series Service Manual page 1504

5) Remove the 3 wire saddles [1] , edge saddle [2] and the connector [3].
x4
9
Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Removing the Deck Unit
[2] [1] [3] [1]
F-9-182
9 Installation > Cassete Heater-32 > Installation Procedure (Connecting to POD Deck / Secondary POD Deck) > Removing the Deck Unit
6) Loosen the 4 screws [1], and remove the front cover [2].
NOTE:
Mark lines on the positions of the 4 screws [1] before removing so that the front cover
[2] can be attached in the correct position.
x4
[1]
[2]
9-87
[1]
[1]
F-9-183
9-87