Canon imagePRESS 1135 Series Service Manual page 1443

NOTE :
Go through the following procedure to fix the process unit.
11) Push the 2 claws of the process unit and put back the process unit until it reaches 10 mm away from the host machine.
12) Place the process unit as shown so that it is positioned approx. 10 mm away from the host machine.
9
Installation > Installation > Installing the developing assembly
CAUTION :
• The drum may be displaced by simply pulling out the process unit.
• Pushing the process unit forcibly may deform the drum frame.
Align the plate of the process unit
with the plate of the host machine [A].
9 Installation > Installation > Installing the developing assembly
F-9-58
9-26
F-9-57
9-26