Canon imagePRESS 1135 Series Service Manual page 1152

COPIER> ADJUST> MISC
TBSIS-WB Set of white band toner ejection time
Lv.2 Details To select the toner ejection amount (time per sheet) in white band
mode.
As the value is changed by 1, toner ejection time is increased/
decreased by 5 sec.
+: Increase
-: Decrease
In case of high-duty users, set the positive value so that the reverse
foggy image can be reduced.
In case of low-duty users, set the negative value so that the toner
ejection time can be reduced.
Use case When reverse foggy image occurs at high-duty users site.
When users with low-duty asks to reduce the toner ejection time.
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution As the positive value is set, the toner ejection time is increased.
Display/adjust/set range -2 to 2
-2: 0 sec, -1: 5 sec, 0: 10 sec, 1: 15 sec, 2: 20 sec
Appropriate target value -2 to 2
Default value 0
Related service mode COPIER> ADJUST> DEVELOP> BIAS-WB
COPIER> ADJUST> MISC> MAXT-WB
MAXT-WB White band injectn toner limit time stng
Lv.2 Details Set ejection limit time of white band mode.
When the high-duty jobs are continuously fed for along term and if
the toner is not fully ejected, do 2 (360 seconds)
When the low duty jobs are continuously fed for a long term and if
white band ejection needs to be disabled, do -2 (0 second).
Use case When the high-duty jogs are continuously fed for a long term and if
the toner is not fully ejected.
When the low-duty jobs are continuously fed for a long term and if
white band ejection needs to be disabled
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adjust/set range -2 to 2
-2: 0 second, -1: 60 seconds, 0: 120 seconds, 1: 240 seconds, 2:
360 seconds
Appropriate target value -1 to 1
Related service mode COPIER> ADJUST> DEVELOP> VPP-WB
COPIER> ADJUST> MISC> TBSIS-WB
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > MISC
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > MISC
COPIER> ADJUST> MISC
TRSD-BB Set of black band threshold value
Lv.2 Details To set the toner ejection amount (threshold) at black band mode
regardless the environmental table that specifies the amount.
As the value is incremented by 1, the toner ejection amount
(threshold) changes by 1% based on 5%.
+: Increase
-: Decrease
Use case When continuously feeding the low-duty jobs for a long term in low
density environment.
When feeding the chart with different density in longitudinal direction.
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution This is effective when the following is set to 1 (disable): COPIER>
ADJUST> MISC> IETBL-BB.
Display/adjust/set range -5 to 10
Unit 1%
Appropriate target value -2 to 2
Default value 0
Related service mode COPIER> ADJUST> MISC> IETBL-BB, TRSD-BB
MAXT-BB Black band injectn toner limit time stng
Lv.2 Details Set ejection limit time of white band mode.
When the low-duty jobs are continuously fed for along term and if the
toner is not fully ejected, do 3 (A4 10 sheets)
When the white band ejection needs to be disabled, do -2 (A4 0
sheet).
Use case • When the low-duty jogs are continuously fed for a long term and if
the toner is not fully ejected.
• When the white band ejection needs to be disabled.
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adjust/set range -2 to 3
-2: 0 sheet, -1: 2 sheets, 0: 4 sheets, 1: 6 sheets, 2: 8 sheets, 3: 10
sheets
Related service mode COPIER> ADJUST> MISC> IETBL-BB
COPIER> ADJUST> MISC> TRSD-BB
8-209
8-209