Canon imagePRESS 1135 Series Service Manual page 1248

COPIER > OPTION > USER
DK13BSTP Float fan stop in M-insrtr low deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the multi-inserter lower deck. Make
a setting of "after how many seconds the fan is turned off when the
timing of the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK11BSTP, DK12BSTP
FX-UI-SW Set of Prdctvty prrty mod screen display
Lv.2 Details To switch the screen display of productivity priority mode.
Set 1 when the user wants to change the productivity priority screen
of the user mode to the previous display format.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: New screen, 1: Previous screen
Default value 0
Related user mode Additional Functions> System Settings> Device Management
Settings> Fixing Temperature Adjustment Mode Switch> Productivity
Priority (Manual)
THK1-DSP Dspl/hide of prdctvty/align prrty:Fin-AG
Lv.1 Details To set whether to display or hide "Finisher Output Priority Set. (Heavy
1,2,3)" in user mode.
Use case When setting productivity/alignment performance of Finisher by user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to receive approval from the user in advance by explaining
that there is a possibility that alignment may decrease by giving
priority on productivity.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related service mode SORTER> OPTION> BUF-THK1
Related user mode Settings/Registration> Common Settings> Finisher Output Priority
Set. (Heavy 1,2,3)
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK1-PNTP Mach Deck pre-punch ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the machine's Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK2-PNTP to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK2-PNTP POD Upr-D pre-punch ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the POD Upper Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP, DK3-PNTP to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8-305
8-305