23) Install the NEW Card Reader I/F plate.
• 2 screws (use the screws removed on the step 18).)
x2
26) Remove the cover of the 6 cord guides.
9
Installation > Card Reader-C1 > Installation Procedure
27) Peel the peel-off paper of the 6 cord guides, and put them on the host machine.
F-9-149
9
Installation > Card Reader-C1 > Installation Procedure
24) Close the controller box.
25) Install the CP side cover.
F-9-148
9-72
F-9-150
9-72