Canon imagePRESS 1135 Series Service Manual page 1165

■ CLEAR
COPIER> FUNCTION> CLEAR
ERR Error code clear
Lv.1 Details Clear error codes (E000, E001, E002, E003, E005).
Use case When an error occurred
Adj/set/operate method 1) Select the item and press the OK key.
2) Turn OFF/ON the main power.
DC-CON RAM clear of DC controller PCB
Lv.1 Details Clear the RAM data of the DC controller PCB.
Use case At the time of clearing of the RAM data of the DC controller PCB
Adj/set/operate method 1) Select the item and press the OK key.
2) Turn OFF/ON the main power.
Caution • Before execution of this item, be sure to output the service mode
setting value by P-PRINT. After execution, enter necessary setting
values.
• The RAM data is cleared after the main power is turned OFF/ON.
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
R-CON RAM clear of reader controller PCB
Lv.1 Details Clear the RAM data of the reader controller PCB.
Use case At the time of clearing of the RAM data of the reader controller PCB
Adj/set/operate method 1) Select the item and press the OK key.
2) Turn OFF/ON the main power.
Caution • Before execution of this item, be sure to output the service mode
setting value by P-PRINT. After execution, enter necessary setting
values.
• The RAM data is cleared after the main power is turned OFF/ON.
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
JAM-HIST Clear of jam history
Lv.1 Details Clear the jam history.
Use case At the time of clearing of the jam history
Adj/set/operate method Select the item and press the OK key.
ERR-HIST Clear of error code history
Lv.1 Details Clear the error code history.
Use case At the time of clearing of the error code history
Adj/set/operate method Select the item and press the OK key.
PWD-CLR Password clear of system administrator
Lv.1 Details Clear the password of the system administrator set by the user
mode.
Use case At the time of clearing of the password of the system administrator
Adj/set/operate method Select the item and press the OK key.
8
Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > CLEAR
8 Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > CLEAR
COPIER> FUNCTION> CLEAR
ADRS-BK Clear of address book
Lv.1 Details Clear the address book data.
Use case At the time of clearing of the address book data
Adj/set/operate method 1) Select the item and press the OK key.
2) Turn OFF/ON the main power.
Caution The address book data is cleared after the main power is turned
OFF/ON.
CNT-MCON Clear of main controller service counter
Lv.1 Details Clear the service counter counted by the main controller PCB.
Use case At the time of clearing of the service counter handled by the main
controller
Adj/set/operate method Select the item and press the OK key.
Related service mode COPIER> COUNTER
Supplement/memo See COUNTER for the target counter.
CNT-DCON Clear of DC controller service counter
Lv.1 Details Clear the service counter (FIN-STPR, FIN-PDDL, SADDLE, STPL)
counted by the DC controller PCB.
Use case At the time of clearing the service counter handled by the DC
controller
Adj/set/operate method Select the item and press the OK key.
Related service mode COPIER> COUNTER> DRBL-2> FIN-STPR, FIN-PDDL, SADDLE,
STPL
MMI Clear of setting value in addi func mode
Lv.1 Details Clear the user mode setting value (excluding values for copier
control panel, common setting, and FAX).
• Common Settings
• Timer Settings
• Adjustment/Cleaning
• Report Settings
• System Settings
• Copy Settings
• Communications Settings
• Printer Settings
Use case To clear each type setting value of user mode.
Adj/set/operate method 1) Select the item and press the OK key.
2) Turn OFF/ON the main power.
Caution The setting value is cleared after the main power is turned OFF/ON.
8-222
8-222