Canon imagePRESS 1135 Series Service Manual page 1388

SORTER> FUNCTION
PIU-BK-R Backup data read of CON PCB: IFU
Lv.1 Details Backup data is read from the I/F unit controller PCB and saved on
the hard disk of the controller.
Use case At the replacement of I/F unit controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> PIU-BK-W
INS-BK-R Backup data read of CON PCB: M-inserter
Lv.1 Details Backup data is read from the multi inserter controller PCB and saved
on the hard disk of the controller.
Use case At the replacement of multi inserter controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> INS-BK-W
FIN-BK-W Backup data write of CON PCB: Fin-AF
Lv.1 Details Backup data saved on the hard disk of the controller is written to the
finisher controller PCB.
Use case At the replacement of finisher controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> FIN-BK-R
FLD-BK-R Backup data read of CON PCB: PFU
Lv.1 Details Backup data is read from paper folding unit controller PCB and
saved on the hard disk.
Use case At the replacement of paper folding unit controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> FLD-BK-W
INS-BK-W Backup data write of CON PCB: M-inserter
Lv.1 Details Backup data saved on the hard disk is written to the multi inserter
controller PCB.
Use case At the replacement of multi inserter controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> INS-BK-R
8
Service Mode > SORTER > FUNCTION
8 Service Mode > SORTER > FUNCTION
SORTER> FUNCTION
PIU-BK-W Backup data write of CON PCB: IFU
Lv.1 Details Backup data saved on the hard disk is written to the I/F unit controller
PCB.
Use case At the replacement of I/F unit controller PCB
Adj/set/operate method Select the item and press OK key.
Display/adj/set range In processing: ACTIVE, at normal termination: OK, at abnormal
termination: NG
Required time Approx. 5 min
Related service mode SORTER> FUNCTION> PIU-BK-R
FN-SENS1 Adj of punch paper size sensor output: Fin-AG
Lv.1 Details On the punch unit of the finisher, output of A3, LDR, B4, A4R and
B5R sensors are automatically adjusted in order.
Use case • At the installation/replacement of punch unit
• At the replacement of punch dust sensor
• At the replacement of finisher controller PCB
Adj/set/operate method Select the item and press OK key.
FN-SENS2 Adj of punch dust sensor output: Fin-AG
Lv.1 Details On the punch unit of the finisher, output of punch dust sensor is
automatically adjusted.
Use case • At the installation/replacement of punch unit
• At the replacement of punch dust sensor
• At the replacement of finisher controller PCB
Adj/set/operate method Enter the setting value and press OK key.
VR1-A4R Upper tray width volume(A4R): inserter
Lv.1 Details Paper minimum width (A4R) of inserter upper tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter upper tray
Adj/set/operate method 1) Set the A4R paper on the inserter upper tray and align it with the
width of slide guide.
2) Select the item and press OK key.
VR1-A4 Adj of upper tray width volume(A4): inserter
Lv.1 Details Paper maximum width (A4) of inserter upper tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter upper tray
Adj/set/operate method 1) Set the A4 paper on the inserter upper tray and align it with the
width of slide guide.
2) Select the item and press OK key.
8-445
8-445