Canon imagePRESS 1135 Series Service Manual page 1132

COPIER> ADJUST> HV-TR
TR-PPR3 Set PPtype for PPallotted volt adj: set3
Lv.2 Details To set the paper type (paper weight) for setting 3.
Setting 3 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV3, TR-PPR3,
TR-DUP3. When this condition is true, paper allotted voltage that is
set at 2TR-TGT3 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV3, TR-DUP3, 2TR-TGT3
TR-PPR4 Set PPtype for PPallotted volt adj: set4
Lv.2 Details To set the paper type (paper weight) for setting 4.
Setting 4 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV4, TR-PPR4,
TR-DUP4. When this condition is true, paper allotted voltage that is
set at 2TR-TGT4 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV4, TR-DUP4, 2TR-TGT4
TR-PPR5 Set PPtype for PPallotted volt adj: set5
Lv.2 Details To set the paper type (paper weight) for setting 5.
Setting 5 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV5, TR-PPR5,
TR-DUP5. When this condition is true, paper allotted voltage that is
set at 2TR-TGT5 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV5, TR-DUP5, 2TR-TGT5
8
Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
8 Service Mode > COPIER > ADJUST (Adjustment Mode) > HV-TR
COPIER> ADJUST> HV-TR
TR-PPR6 Set PPtype for PPallotted volt adj: set6
Lv.2 Details To set the paper type (paper weight) for setting 6.
Setting 6 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV6, TR-PPR6,
TR-DUP6. When this condition is true, paper allotted voltage that is
set at 2TR-TGT6 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV6, TR-DUP6, 2TR-TGT6
TR-PPR7 Set PPtype for PPallotted volt adj: set7
Lv.2 Details To set the paper type (paper weight) for setting 7.
Setting 7 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV7, TR-PPR7,
TR-DUP7. When this condition is true, paper allotted voltage that is
set at 2TR-TGT7 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV7, TR-DUP7, 2TR-TGT7
TR-PPR8 Set PPtype for PPallotted volt adj: set8
Lv.2 Details To set the paper type (paper weight) for setting 8.
Setting 8 is the condition combination of environment, paper type
(paper weight) and feeding side that are set at TR-ENV8, TR-PPR8,
TR-DUP8. When this condition is true, paper allotted voltage that is
set at 2TR-TGT8 is applied to the secondary transfer inner roller.
Use case When an image failure that is subject to paper type occurs (mottled
image/density loss due to excessive transfer/toner splash on solid
image).
Adj/set/operate method Enter the setting value and press OK key.
Display/adj/set range 1 to 8
1: plain paper, 2: heavy paper, 3: envelope, 4: tracing paper, 5:
transparency, 6: postcard, 7: labels, 8: bond paper
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV8, TR-DUP8, 2TR-TGT8
8-189
8-189