Canon imagePRESS 1135 Series Service Manual page 1213

COPIER > OPTION > FEED-SW
DK11REST Adj ppr rest lvl in M-Insert UprD
Lv.1 Details Adjusting threshold for paper remaining level to be determined as
"no paper" in the upper deck of the Multi Drawer Document Insertion
Unit.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK12REST, DK13REST
DK12REST Adj ppr rest lvl in M-Insert MidD
Lv.1 Details Adjusting threshold for paper remaining level to be determined as "no
paper" in the middle deck of the Multi Drawer Document Insertion
Unit.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK11REST, DK13REST
DK13REST Adj ppr rest lvl in M-Insert LowD
Lv.1 Details Adjusting threshold for paper remaining level to be determined as
"no paper" in the lower deck of the Multi Drawer Document Insertion
Unit.
In the case that too many sheets of paper is remained in the deck,
increase the setting value so that more sheets of paper can be used
(almost to the limit).
1 increment of the value reduces the paper remaining level by 20
sheets (approx.).
Use case Upon request from the user
Caution Paper remaining level varies according to the air-floatation condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK11REST, DK12REST
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
COPIER > OPTION > FEED-SW
PFIX-A-1 ON/OFF of pre-fix feed up/dwn ctrl:130kg
Lv.1 Details Set ON/OFF of the up/down control of the pre-fixing feed assembly
when 130 kg pressure is applied to the pressure roller (1500 pulse).
In the up/down control, the pre-fixing feed assembly is lifted up right
before the paper enters the assembly, and is lifted down right before
it enters the fixing nip. Because the suction efficiency of the fan in
the pre-fixing feed assembly is improved, the impact applied when
the paper enters the fixing nip is reduced, which improves uneven
image density caused by shock of the paper entering the nip.
This item is used for Plain Paper 1 (79 g/m2 or lighter) and Coated
Paper 1 (90 g/m2 or lighter).
Use case When uneven image density occurs in main scanning direction (due
to shock of the paper entering the fixing nip) at 227 to 255 mm from
the leading edge of the paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution When 5 sheets of paper of which length in feeding direction is 227.3
mm or longer are printed consecutively, uneven image density
should be improved.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
PFIX-A-2 ON/OFF of pre-fix feed up/dwn ctrl:145kg
Lv.1 Details Set ON/OFF of the up/down control of the pre-fixing feed assembly
when 145 kg pressure is applied to the pressure roller (1900 pulse).
In the up/down control, the pre-fixing feed assembly is lifted up right
before the paper enters the assembly, and is lifted down right before
it enters the fixing nip. Because the suction efficiency of the fan in
the pre-fixing feed assembly is improved, the impact applied when
the paper enters the fixing nip is reduced, which improves uneven
image density caused by shock of the paper entering the nip.
This item is used for Plain Paper 2 (80 to 105 g/m2), Thick Paper 1
(106 to 180 g/m2), Coated Paper 2 (91 to 120 g/m2), Coated Paper
3 (121 to 128 g/m2), and Coated Paper 4 (129 to 150 g/m2).
Use case When uneven image density occurs in main scanning direction (due
to shock of the paper entering the fixing nip) at 227 to 255 mm from
the leading edge of the paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution When 5 sheets of paper of which length in feeding direction is 227.3
mm or longer are printed consecutively, uneven image density
should be improved.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-270
8-270