Canon imagePRESS 1135 Series Service Manual page 1398

SORTER> OPTION
PRD-PRTY Prdctvty prrty btch at sort/staple:FinAG
Lv.1 Details To simultaneously set BUFF-THK, PRCS-SP2, BUFF-MX2, PRCS-
MX2, and BUF-THK1.
When 1 is set, productivity priority is set for all corresponding items
of Finisher, so productivity of sort and staple mode is improves.
Use case When prioritizing productivity of sort and staple mode of Finisher
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Productivity is improved, but jam or misalignment might occur.
Display/adj/set range 0 to 1
0: Normal, 1: Priority on productivity
Default value 0
Related service mode SORTER> OPTION> BUFF-THK, PRCS-SP2, BUFF-MX2, PRCS-
MX2, BUF-THK1
FIN-SP1 Finisher special settings 1
Lv.2 Details Execute the Finisher special settings 1.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution • Do not use this at the normal service.
• Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
FIN-SP2 Finisher special settings 2
Lv.2 Details Execute the Finisher special settings 2.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution • Do not use this at the normal service.
• Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000
SLD-BCK Set bleed-thru improvement mode: Fin-AG
Lv.1 Details When the back of the coated paper as the cover is soiled, set 1/2.
Use case When the back of paper is soiled while coated paper is used as
cover
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Productivity is improved, but jam or misalignment might occur.
Display/adj/set range 0 to 2
0: OFF, 1: ON (Coated paper + Recycled paper), 2: ON (Coated
paper +Plain paper)
Default value 0
8
Service Mode > SORTER > OPTION
8 Service Mode > SORTER > OPTION
SORTER> OPTION
STP-MAX Set max number of sheets for staple: Fin
Lv.1 Details To set the maximum number of sheets to be stapled in the Finisher.
Use case • When increasing the stapleable quantity upon user's request
• When decreasing the stapleable quantity at the time of staple
failure occurrence due to the paper type or use environment
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution If the setting value is larger than the default (upper limit on the
specification), staple failure may occur.
Default value 100
SDL-MAX Set max No. of sht for staple:Saddle Fin
Lv.1 Details To set the maximum number of sheets to be stapled in the Saddle
Finisher.
Use case • When increasing the stapleable quantity upon user's request
• When decreasing the stapleable quantity at the time of staple
failure occurrence due to the paper type or use environment
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution If the setting value is larger than the default (upper limit on the
specification), staple failure may occur.
Default value 25
NEAT-MIX ON/OFF ppr align func:mixed ppr wid dvry
Lv.1 Details To set whether to enable paper alignment function when delivering
papers which widths are different.
When 0 is set, the setting of NEAT-SW is disabled. When 1 is set,
paper alignment is performed.
Use case When not performing paper alignment at the time of delivering paper
which widths are different
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
NEAT-SW Set ppr align cndtn: mixed ppr wid dvry
Lv.1 Details To set the conditions for performing paper alignment when delivering
papers which widths are different.
When the specified condition (paper type) is satisfied while NEAT-
MIX is ON, paper alignment is performed.
Use case When performing paper alignment with a specific paper type (neat
alignment)
Adj/set/operate method Enter the setting value, and then press OK key.
Default value 0
8-455
8-455