Canon imagePRESS 1135 Series Service Manual page 1249

COPIER > OPTION > USER
DK3-PNTP POD Mid-D pre-punch ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the POD Middle Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP, DK2-PNTP, DK4-PNTP to
DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK4-PNTP POD Low-D pre-punch ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the POD Lower Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK3-PNTP, DK5-PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK5-PNTP Sec PD Upr punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD Upper Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK4-PNTP, DK6-PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
DK6-PNTP Sec PD Mid punched ppr dble fd prev mod
Lv.1 Details To set ON/OFF of pre-punched paper double feed prevention mode
of the Secondary POD Middle Deck.
If double feed occurs frequently when feeding pre-punched paper
with punched side being fed first, set 1.
When pre-punched paper is set as "Paper Type" in user mode, this
item is enabled.
Use case When double feed occurs frequently with pre-punched paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 1 is set, double feed is decreased, but productivity decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> USER> DK1-PNTP to DK5-PNTP, DK7-PNTP
to DK13PNTP
Related user mode Settings/Registration> Common Settings> Register Paper
8-306
8-306