Canon imagePRESS 1135 Series Service Manual page 1384

SORTER> ADJUST
SDL-STP Adj of Saddle Sttch staple pstn: Fin-AG
Lv.1 Details To adjust the staple position of Saddle Stitcher.
As the value is incremented by 1, the staple position moves by
0.1 mm.
+:
-:
Use case When the staple position of the Saddle Stitcher is displaced
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.1 mm
Default value 0
SDL-FLD Adj of Saddle Stitcher fold pstn: Fin-AG
Lv.1 Details To adjust the fold position of Saddle Stitcher.
As the value is incremented by 1, the fold position moves by 0.1 mm.
+:
-:
Use case When the fold position of the Saddle Stitcher is displaced
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.1 mm
Default value 0
SDL-ALG Adj of Saddle Sttch align width: Fin-AG
Lv.1 Details To adjust the alignment width of Saddle Stitcher.
As the value is incremented by 1, the alignment width is increased
by 0.2 mm.
+:
-:
Use case When the misalignment occurs within a paper stack on the Saddle
Stitcher
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.2 mm
Default value 0
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
SDL-RLPT Sddl Sttch Diseng Rol diseng amnt:Fin-AG
Lv.1 Details To adjust the disengagement amount of Saddle Stitcher
Disengagement Roller.
As the value is incremented by 1, the disengagement amount is
increased by 0.5 mm.
+:
-:
Use case When the feed failure (with thin paper, etc.) occurs on the Saddle
Stitcher
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.5 mm
Default value 0
SDL-RLFD Sddl Sttch Diseng Roll feed amnt: Fin-AG
Lv.1 Details To adjust the feed amount of Saddle Stitcher Disengagement Roller.
As the value is incremented by 1, the feed amount is increased by
0.2 mm.
+:
-:
Use case When the feed failure (with thin paper, etc.) occurs on the Saddle
Stitcher
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.2 mm
Default value 0
SDL-RLHD Sddl Sttch Diseng Roll fold pstn: Fin-AG
Lv.1 Details To adjust the fold position of Saddle Stitcher Disengagement Roller.
As the value is incremented by 1, the fold position moves by 0.5 mm.
+:
-:
Use case When the feed failure (with thin paper, etc.) occurs on the Saddle
Stitcher
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range -20 to 20
Unit 0.5 mm
Default value 0
8-441
8-441