Canon imagePRESS 1135 Series Service Manual page 1458

2) Check the setting of initial rotation OFF.
Check that "1" is specified for: Service mode > COPIER > FUNCTION > INSTALL > AINR-OFF.
NOTE :
The service mode setting will automatically return to "0" once TONER-S
to be performed later is complete.
3) Execute ITB neutral position adjustment.
Get in Service Mode to select the following: COPIER > FUNCTION > INSTALL > INIT-ITB
Display I/O Adjust
<INSTALL >
INIT-ITB OK!
TONER-S2
9
Installation > Installation > Initial installation Service Mode 1
Function Option Test Counter
< 2/ 2 > <NO-PAPER>
OK
F-9-89
9 Installation > Installation > Initial installation Service Mode 1
Display I/O Adjust Function Option Test Counter
<INSTALL > < 1/ 2 > <NO-PAPER>
TONER-S
CARD 0 ( 0) { 1 2001}
AINR-OFF 1 ( 0) { 0 1}
E-RDS 0 ( 0) { 0 1}
RGW-PORT 443 ( 443) { 1 65535}
COM-TEST
RGW-ADR
RGW-ADR https://a01.ugwdevice.net/ugw/agenti
OK
4) Exit from the Service Mode.
F-9-88
9-41
9-41