Canon imagePRESS 1135 Series Service Manual page 1229

COPIER > OPTION > USER
OP-SZ-DT Set original size detect at copybrd open
Lv.2 Details Setting to enable/disable detection of original size while the
copyboard is open.
When detection is enabled, pressing Start key starts detection.
When detection is disabled, enter the original size on the control
panel.
Use case In the case of enabling auto detection of the original size such as
thick book or stereoscopic item.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Selection for SIZE-DET is 1: COPIER> OPTION> USER> SIZE-DET;
when the original size detection function is ON, this mode is enabled.
Display/adj/set range 0 to 1
0: No detection, 1: Detection
Default value 0
Related service mode COPIER> OPTION> USER> SIZE-DET (Level 2)
NW-SCAN Set of network scan function usage
Lv.2 Details Setting to enable/disable use of network scan function
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution • Do not use this mode in Japan.
• For PS/PCL machines for overseas (outside Japan), select 1 to fix
the setting (enable this mode). For others, permit use.
Display/adj/set range 0 to 1
0: Disable, 1: Enable
TBIC-RNK Set halftone unevn pitch reductn at copy
Lv.2 Details Set the degree of TBIC dot dispersion to reduce halftone pitch
unevenness for copy operation.
When the value is increased, the dot is concentrated and halftone
pitch unevenness is reduced.
Use case To improve halftone pitch unevenness for copy operation
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution • Do not use this item for regular servicing work.
• Do not decrease the value. If the value is decreased, the dot is
dispersed and halftone pitch unevenness increases.
Display/adj/set range 1 to 5
Default value 2
Supplement/memo TBIC: Error diffusion method used for pseudo halftone processing
(image processing)
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
HDCR-DSP Setting of HDD complete clear method
Lv.2 Details Setting of data erasing method of HDD complete erase (clear)
function
Use case In the case of switching erasing method of HDD complete erase
mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 1 to 3
1: 1-time erase with 0 (null) data, 2: 1-time erase with random data,
3: 3-time erase with random data
Default value 1
Supplement/memo HDD complete erase function: a function to completely erase data in
HDD by overwriting 0 (null) data or random data to the file data when
logically erasing file on HDD (erase management information data).
JOB-INVL Job interval setting at interruption cpy
Lv.2 Details Setting of output interval between jobs at the time of interruption
copy.
Sorting is difficult after interruption copy because of the continuous
output of the next job. Paper interval is available by having pickup
from the next job to start after the last sheet from the previous job is
delivered.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: Continuous output of the interruption copy and the next job
1: The next job starts to be picked up after all the interruption copy is
delivered.
2: The next job starts to be picked up after all the previous job is
delivered (for all job)
Default value 0
TAB-ROT Set of landscape img rotn at PDL:tab ppr
Lv.1 Details To set whether to rotate landscape image by 180 degrees when PDL
print is made on tab paper.
When "1: Rotated" is set, image is rotated.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Not rotated, 1: Rotated
Default value 0
8-286
8-286