Canon imagePRESS 1135 Series Service Manual page 1192

COPIER > OPTION > IMG-FIX
FX-LVL02 Set of fixing abilty (POD upper deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
FX-LVL03 Set of fixing abilty (POD middle deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
FX-LVL04 Set of fixing abilty (POD lower deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > IMG-FIX
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > IMG-FIX
COPIER > OPTION > IMG-FIX
FX-LVL05 Set of fixing abilty (secPOD upper deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
FX-LVL06 Set of fixing abilty(secPOD middle deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
FX-LVL07 Set of fixing abilty (secPOD lower deck)
Lv.1 Details Setting for fixing performance.
Selecting the mode with priority on fixing performance makes the
paper in the deck to be fed with the sequence to improve fixing
performance (increasing fixing temperature + drop in throughput).
Perform this mode separately for each deck.
Use case In the case of low fixing performance
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Standard mode, 1: Mode with priority on fixing performance
Default value 0
Supplement/memo Following can be applied at the same time: COPIER> OPTION>
IMG-FIX> OHP-TEMP
8-249
8-249