Canon imagePRESS 1135 Series Service Manual page 1234

COPIER > OPTION > USER
JA-RESTR Set of job archive limit items
Lv.2 Details Setting of restriction item for job archive specification
With job archive function enabled, follow the setting to execute
operation to restrict specification.
Caution Changing this mode is not available in Service Mode, but reference
is available (in Service mode).
This mode is available only with the MEAP program that supports job
archive.
Display/adj/set range 0 to 1
0: OFF, 1: ON
32 specification restrictions with Bit definition
Bit0: function to obtain image file (0: OFF, 1:ON)
Bit1: function to compose form registration (0: OFF, 1: ON)
Bit2: function to edit document (0:OFF, 1: ON)
Default value 0
Related service mode COPIER> OPTION> USER> JA-FUNC
LDAP-SW Retrieval condition set for LDAP server
Lv.1 Details Setting the condition to search e-mail address, etc. from LDAP
server.
Use case In the case of specifying condition to search e-mail address, etc.
from LDAP server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 5
0: Includes the next, 1: No inclusion of the next,
2: Equivalent to the next, 3: Not equivalent to the next,
4: Starts with the next, 5: Finish with the next
Default value 4
Supplement/memo LDAP (Lightweight Directory Access Protocol): Registering LDAP
server enables to search e-mail address, etc. from LDAP server and
the result can be registered in the address book, etc. Registration is
available by the following: System Settings> Register LDAP server
FROM-OF Deletion of mail sender's address
Lv.1 Details Setting whether to delete the sender's address (From) at the time of
e-mail transmission.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Keep, 1: Delete
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DOM-ADD Additional entry of mail destintn domain
Lv.2 Details Setting to automatically add domain specified in User Mode to the
sending address (To) entered at the time of e-mail transmission.
If specifying "xxx.com" to domain in User Mode in advance, just
entering "aaa" enables to display "aaa@xxx.com" when sending
e-mail.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: No supply, 1: Supply
Default value 0
SPEAKER Dspl/hide to switch speaker/head-phone
Lv.1 Details Setting to display/hide "speaker/headphone switch" on the setup
screen for voice specification in User Mode.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
Related user mode Additional Functions> Voice Navigation Settings
Supplement/memo "Voice Navigation Settings" in User Mode is displayed only when the
voice guidance kit is installed.
FILE-OF File send prohibition to entered address
Lv.1 Details Setting to prohibit address entry at the time of file transmission.
File transmission is not available by entering the address because of
no display of "File" on the transmission screen.
The addresses already registered in the address book can be used.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the address book can be
used.
Display/adj/set range 0 to 1
0: Allow, 1: Prohibit
Default value 0
8-291
8-291