Canon imagePRESS 1135 Series Service Manual page 1446

16) Push in the process unit to the host machine.
CAUTION :
If the process unit fails to be fitted into the rear, turn the groove
of the drum home position detection flag by 45 degree to find
the appropriate position to push in to the rear.
17) Secure the process unit.
• 4 screws (use the screws removed in step 5) at "Removing the transportation packing
member of the process unit".)
x4
9
Installation > Installation > Installing the developing assembly
F-9-64
9 Installation > Installation > Installing the developing assembly
9-29
F-9-63
9-29