Canon imagePRESS 1135 Series Service Manual page 1386

SORTER> ADJUST
BF-SB-A4 Adj switchback position for A4: Fin-AG
Lv.1 Details To adjust the paper switchback position when A4 size paper is waited
in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1 mm.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm
BF-SB-B5 Adj switchback position for B5: Fin-AG
Lv.1 Details To adjust the paper switchback position when B5 size paper is waited
in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1 mm.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm
BF-SB-LT Adj switchback position for LTR: Fin-AG
Lv.1 Details To adjust the paper switchback position when LTR size paper is
waited in the buffer path.
As the value is incremented by 1, the switchback amount is
increased by 1 mm.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 50
Unit 1 mm
RTR-UPA4 Adj Ppr Rtn Roll rise angle(A4): Fin-AG
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to A4 size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1 degree
Appropriate target value 1
8
Service Mode > SORTER > ADJUST
8 Service Mode > SORTER > ADJUST
SORTER> ADJUST
RTR-UPB5 Adj Ppr Rtn Roll rise angle(B5): Fin-AG
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to B5 size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1 degree
Appropriate target value 1
RTR-UPLT Adj Ppr Rtn Roll rise angle(LTR):Fin-AG
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to LTR size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1 degree
Appropriate target value 1
PUNCH-SB Adj Punch Unit ppr swback amnt: Fin-AG/AK
Lv.1 Details To adjust the paper switchback amount in the high accuracy punch
mode of Finisher.
As the value is incremented by 1, the switchback amount is
increased by 1 mm.
Use case When the punch accuracy deteriorates in the paper feed direction
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 4
Unit 1 mm
Appropriate target value 2
ST-ALG1 Adj Stacker A4 size align pstn: Fin-AG
Lv.1 Details To adjust the A4 size paper alignment position of the Process Tray.
As the value is incremented by 1, the Alignment Plate moves inward
by 0.1 mm.
Use case When misalignment occurs in A4 size paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -50 to 50
Unit 0.1 mm
Default value 0
8-443
8-443