Canon imagePRESS 1135 Series Service Manual page 1389

SORTER> FUNCTION
VR1-LTRR Adj of upper tray width volume(LTRR): inserter
Lv.1 Details Paper minimum width (LTRR) of inserter upper tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter upper tray
Adj/set/operate method 1) Set the LTRR paper on the inserter upper tray and align it with the
width of slide guide.
2) Select the item and press OK key.
VR1-LTR Adj of upper tray width volume(LTR): inserter
Lv.1 Details Paper maximum width (LTR) of inserter upper tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter upper tray
Adj/set/operate method 1) Set the LTR paper on the inserter upper tray and align it with the
width of slide guide.
2) Select the item and press OK key.
VR2-A4R Adj of lower tray width volume(A4R): inserter
Lv.1 Details Paper minimum width (A4R) of inserter lower tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter lower tray
Adj/set/operate method 1) Set the A4R paper on the inserter lower tray and align it with the
width of slide guide.
2) Select the item and press OK key.
VR2-A4 Adj of lower tray width volume(A4): inserter
Lv.1 Details Paper maximum width (A4) of inserter lower tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter lower tray
Adj/set/operate method 1) Set the A4 paper on the inserter lower tray and align it with the
width of slide guide.
2) Select the item and press OK key.
VR2-LTRR Adj of lower tray width volume(LTRR): inserter
Lv.1 Details Paper minimum width (LTRR) of inserter lower tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter lower tray
Adj/set/operate method 1) Set the LTRR paper on the inserter lower tray and align it with the
width of slide guide.
2) Select the item and press OK key.
8
Service Mode > SORTER > FUNCTION
8 Service Mode > SORTER > FUNCTION
SORTER> FUNCTION
VR2-LTR Adj of lower tray width volume(LTR): inserter
Lv.1 Details Paper maximum width (LTR) of inserter lower tray is automatically
adjusted.
Use case When erroneously detected the size mismatch jam at the pickup of
inserter lower tray
Adj/set/operate method 1) Set the LTR paper on the inserter lower tray and align it with the
width of slide guide.
2) Select the item and press OK key.
FIN-CON RAM clear of CON PCB: Fin-AG
Lv.1 Details RAM clear of finisher controller PCB is excuted so that all the
adjustment contents and the counter information is deleted.
Adj/set/operate method 1) Select the item and press OK key.
2) Turn OFF/ON the main power switch.
Caution • Output the service mode setting value in P-PRINT before
execution. After execution, enter the necessary setting value.
• RAM clear is executed after the main power is turned OFF/ON.
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
PF-CON RAM clear of CON PCB: PFU
Lv.1 Details RAM clear of folder controller PCB on paper folding unit is excuted
so that all the adjustment contents and the counter information is
deleted.
Adj/set/operate method Select the item and press OK key.
PF-SENS1 Adj speed down timing sensor output: PFU
Lv.1 Details On the paper folding unit, output of speed down timing sensor is
automatically adjusted.
Use case • At the replacement of speed down timing sensor
• At the replacement of folder roller PCB
Adj/set/operate method Select the item and press OK key.
PF-SENS2 Adj disengage timing sensor output: PFU
Lv.1 Details On the paper folding unit, output of disengage timing sensor is
automatically adjusted.
Use case • At the replacement of disengage timing sensor.
• At the replacement of folder roller PCB.
Adj/set/operate method Select the item and press OK key.
PF-SENS3 Adj of fold position sensor output: PFU
Lv.1 Details On the paper folding unit, output of fold position sensor is
automatically adjusted.
Use case • At the replacement of fold position sensor.
• At the replacement of folder roller PCB.
Adj/set/operate method Select the item and press OK key.
PF-SENS4 Adj of upper stopper path sensor output: PFU
Lv.1 Details On the paper folding unit, output of upper stopper path sensor is
automatically adjusted.
Use case • At the replacement of upper stopper path sensor.
• At the replacement of folder roller PCB.
Adj/set/operate method Select the item and press OK key.
8-446
8-446