Canon imagePRESS 1135 Series Service Manual page 1216

COPIER > OPTION > FEED-SW
TBTP-PRT Set tab position at Stacker delivery
Lv.1 Details To set whether the tab side or the non-tab side of tab paper to be fed
first at the time of the Stacker delivery.
When 1 is set, the tab side is fed first at the time of the Stacker
delivery. When DUP-TAB is 1, productivity is improved.
Use case When prioritizing the productivity of 2-sided tab paper print
Adj/set/operate method Input the setting value, and press OK.
Caution - When 1 is set while DUP-TAB is 0, productivity may decrease.
- When 1 is set, special control at Common Settings> Tab Paper
Insertion in user mode becomes disabled.
Display/adjust/set range 0 to 1
0: Non-tab side is fed first, 1: Tab side is fed first
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DUP-TAB
Related user mode Special control at Common Settings> Tab Paper Insertion
PG-TAB Set PG print start pstn: feed tab first
Lv.1 Details To set which the tab part or the non-tab part of the tab paper to be
considered as the leading edge of paper when performing PG output
while the tab side is fed first.
When 1 is set, PG print starts from the non-tab part at the time of
performing skew correction and image position adjustment for tab
paper, so it becomes easier to check the skew amount and the
image leading edge position.
When feeding tab papers with tab side being fed first (TBTP-PRT is 1),
this item is enabled.
Use case When adjusting skew amount of paper and the image position with
PG output while the tab side of the tab paper is fed first
Adj/set/operate method Input the setting value, and press OK.
Caution Be sure to return the value to 0 after PG output. If starting a job while
the value is 1, print start position is misaligned.
Display/adjust/set range 0 to 1
0: Tab part, 1: Non-tab part
Default value 0
Related service mode COPIER> FUNCTION> TEST> PG
COPIER> ADJUST> FEED-ADJ> TAB-SKEW, TAB-TOP
COPIER> OPTION> FEED-SW> TBTP-PRT
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FEED-SW
COPIER > OPTION > FEED-SW
CONT-APS Set Pickup Cassette select for next job
Lv.1 Details To set the method for selecting the Pickup Cassette for succeeding
jobs.
Normally, papers are picked up from the Paper Cassette with high
priority for each job.
When 1 is set, if the paper type and size of paper in the Paper
Cassette which was used for the last job are the same as those
for the succeeding job, use the cassette as a top priority for the
succeeding job
Use case When picking up from the same Paper Cassette in a row for the jobs
which use the same paper type and size
Adj/set/operate method Input the setting value, and press OK.
Display/adjust/set range 0 to 1
0: Same as conventional machines (select the Paper Cassette which
priority is high)
1: Pickup from the Paper Cassette from which paper was lastly
picked up if paper type and size are the same
Default value 0
TAB-STK Dvry Push-on Plate crrct pstn switch:HCS
Lv.2 Details To switch the correction position of the Delivery Push-on Plate at the
time of tab paper delivery.
Jam caused by projection of tab part at the time of tab paper delivery
is prevented.
Use case When a jam occurs at the time of tab paper delivery
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When correction position is not switched:
- For a job which needs tab papers, a jam occurs at delivery.
- Stacking performance of non-tab paper is improved.
When correction position is switched:
- A job which needs tab papers can be delivered without occurrence
of jam.
- Stacking performance of non-tab paper is decreased. (Because
the Push-on Plate is shifted for the amount of tab part.)
Display/adj/set range 0 to 1
0: Correction position of the Push-on Plate is not switched for PDL
job.
1: Correction position of the Push-on Plate is switched for PDL job.
(Shift the position in consideration of tab part.)
Default value 1
8-273
T-8-70
8-273