Canon imagePRESS 1135 Series Service Manual page 1236

COPIER > OPTION > USER
TNRB-SW Setting of toner bottle counter display
Lv.2 Details Setting whether to display/hide the toner bottle counter on counter-
checking screen.
Use case In the case not to show the screen to users.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: Hide (no display), 1: Display (toner bottle counter only),
2: Display (toner bottle counter + counter to remove in the middle)
Default value Countries other than USA: 0, USA: 2
CLR-TIM Set of HDD encrypn kit data erase timing
Lv.2 Details Setting the timing to completely erase (clear) data when HDD
encryption kit is used.
Selecting 0 can reduce the speed for job processing due to overload
to CPU or HDD access in the process because of clearing page data
that has already been processed.
Selecting 1 improves the speed for job processing because the
process is executed after the job is completed.
Use case Upon request to improve the speed for job processing
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: During job process, 1: After the job is completed
Default value 0
ATCT-ADD Setting of auto clear time
Lv.1 Details Adding 10, 20, 30, 40, 50 sec for auto clear time (or shifting time to
the auto off line that works with the auto clear time).
Without this setting, the interval is 1-minute basis from 0 to 9 min.
With this setting enabled, there will be no display of "Entry with
numeric key is available" or "(0-min = N.A./ 1 to 9 min)" on the setting
screen of auto clear time in User Mode.
Use case In the case to specify the auto clear time (or the shifting time to the
auto off line that works with the auto clear time) 1 minute or less.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: No addition, 1: Addition (10/20/30/40/50 sec.)
Default value 0
Related user mode Additional Settings> Timer Settings> Auto Clear Time
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
HDCR-DSW Dspl/hide of HDD complete clear ON/OFF
Lv.1 Details Setting to display/hide "ON/OFF for hard disk complete clear" in User
Mode.
With this setting, HDD data complete clear function is available with
ON/OFF button on the screen to set HDD complete clear.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution This mode is enabled when selecting ON for HDD data complete
clear function (license).
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
Related user mode Additional Functions> System Settings> HDD complete clear
setting> ON/OFF for HDD complete clear
DK1-ASST Air heater setting of host machine deck
Lv.1 Details Set the condition (media/environment) to turn on the paper
separation air heater at the main unit deck.
When the media is switched from non-coated paper to coated paper,
paper pickup operation does not start until the temperature of the
paper separation air heater reaches the specified temperature.
To shorten the wait time, make a setting of "Not dependent on the
media".
When the use environment is near the threshold for turning ON/
OFF the heater, switching occurs frequently, which increases the
wait time. To shorten the wait time, make a setting of turning on the
heater constantly.
Use case When it is requested to shorten the wait time
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Caution • To make a setting of "Not dependent on the media", be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance for non-coated
paper may decrease.
• To make a setting of turning on the heater constantly, be sure to
receive approval from the user in advance after explaining that
there is a possibility that transfer performance may decrease when
humidity decreases.
Display/adj/set range 0 to 2
0: Dependent on the media and environment condition
1: Dependent on the environment condition (Not dependent on the
media)
2: Turning on the heater constantly (Not dependent on environment/
media)
Default value 0
Related service mode COPIER> OPTION> USER> DK2-ASST to DK10ASST
8-293
8-293