Canon imagePRESS 1135 Series Service Manual page 1314

COPIER> COUNTER> H-DRBL-1
PU-LF-MR Lifter drive motor parts counter
Lv.1 Details Target parts: Lifter drive motor (M71)
1st line: total counter value from the previous replacement
2nd line: estimated life
Use case When checking the consumption level of parts or replacing the parts.
Adj/set/operate method To clear the counter value: Select the item and press the Clear key.
To change the estimated life: Select the item, enter the value and
press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Appropriate target value 0
FUS-HTR Fixing unit heater parts counter
Lv.1 Details Target parts: Fixing heater (H2/H3), pressure heater (H8/H9),
external heat heater (H4/H5), external heat heater2 (H6/H7)
1st line: total counter value from the previous replacement
2nd line: estimated life
Use case When checking the consumption level of parts or replacing the parts.
Adj/set/operate method To clear the counter value: Select the item and press the Clear key.
To change the estimated life: Select the item, enter the value and
press OK key.
Caution Clear the counter value after replacement.
Display/adj/set range 0 to 99999999
Appropriate target value 0
8
Service Mode > COPIER > COUNTER > H-DRBL-1
T-8-91
8 Service Mode > COPIER > COUNTER > H-DRBL-1
8-371
8-371