Canon imagePRESS 1135 Series Service Manual page 1174

COPIER > OPTION > FNC-SW
W/SCNR Setting of reader installation
Lv.1 Details Setting for installation of the reader (option).
1 (installed) is automatically selected once a reader is detected at
the start of the host machine.
Use case When installing/removing the reader.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Not installed, 1: Installed
Default value Subject to the setting at shipment
ORG-LGL Special paper size set in DADF mode: LGL
Lv.2 Details Setting of the size of special paper (LGL configuration) that cannot
be recognized in DADF stream scanning mode.
Use case - Upon request from the user
- In the case of pickup of special paper size original from DADF.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 10
0: LEGAL-R, 1: FOOLSCAP-R, 2: OFICIO-R, 3: FOLIO-R,
4: Australian FOOLSCAP-R, 5: Ecuador OFICIO-R,
6: Bolivia OFICIO-R, 7: Argentine OFICIO-R, 8: Argentine LEGAL-R,
9: Government LEGAL-R, 10: Mexico OFICIO-R
Default value 0
ORG-LTR Special paper size set in DADF mode: LTR
Lv.2 Details Setting of the size of special paper (LTR configuration) that cannot
be recognized in DADF stream scanning mode.
Use case - Upon request from the user
- In the case of pickup of special paper size original from DEDF.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 3
0: LETTER, 1: EXECUTIVE, 2: Argentine LETTER, 3: Government
LETTER
Default value 0
ORG-LTRR Special paper size set in DADF mode:LTRR
Lv.2 Details Setting of the size of special paper (LTRR configuration) that cannot
be recognized in DADF stream scanning mode.
To convert to the specified size to properly formulate image when the
Inch/AB-configuration DADF detects B5 paper.
Use case - Upon request from the user
- In the case of pickup of special paper size original from DEDF.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: LETTER-R, 1: OFICIO-R, 2: Ecuador OFICIO-R
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
COPIER > OPTION > FNC-SW
ORG-LDR Special paper size set in DADF mode: LDR
Lv.2 Details Setting of the size of special paper (LDR configuration) that cannot
be recognized in DADF stream scanning mode.
To convert to the specified size to properly formulate image when the
Inch/AB-configuration DADF detects B5 paper.
Use case - Upon request from the user
- In the case of pickup of special paper size original from DEDF.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: LEDGER-R(11x 17), 1: Argentine LETTER
Default value 0
ORG-B5 Special paper size set in DADF mode: B5
Lv.2 Details Setting of the size of special paper (B5) that cannot be recognized in
DADF stream scanning mode.
Use case - Upon request from the user
- In the case of pickup of special paper size original from DEDF.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: B5, 1: Korean government office paper
Default value 0
INTROT-1 Set of post-rotatn EPC-DMAX-TR2 interval
Lv.1 Details To set the interval to execute EPC-DMAX-TR2 at post-rotation.
As the value is increased by 1, interval is extended by 500 sheets.
When 0 is specified, control is not executed.
Use case To match the use environment of the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Increasing the number of sheets (increase the interval) causes
higher frequency of image fault.
Display/adj/set range 0 to 255
0: No control
Unit 500 sheets
Default value 4
8-231
8-231