Canon imagePRESS 1135 Series Service Manual page 1170

COPIER> FUNCTION> MISC-P
DMAX-N D-max control execution: plain paper
Lv.1 Details Manually execute D-max control for plain paper group. (It is usually
executed automatically.)
The result is displayed under COPIER> DISPLAY> DENS> DMAX-N.
Use case When checking the independent operation at the replacement of
patch sensor or cleaning.
Adj/set/operate method Select the item and press the OK key.
Caution Be sure to execute this item after P-LED and P-BASE.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time 4 seconds
Related service mode COPIER> DISPLAY> DENS> DMAX-N
DMAX-S D-max control execution: coat paper
Lv.1 Details Manually execute D-max control for coated paper group. (It is usually
executed automatically.)
The result is displayed under COPIER> DISPLAY> DENS> DMAX-S.
Use case When checking the independent operation at the replacement of
patch sensor or cleaning.
Adj/set/operate method Select the item and press the OK key.
Caution Be sure to execute this item after P-LED and P-BASE.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time 4 seconds
Related service mode COPIER> DISPLAY> DENS> DMAX-S
P-BASE Base detection by patch sensor
Lv.2 Details Detect the ITB foundation by the patch sensor. (It is usually executed
automatically.)
The result is displayed under COPIER> DISPLAY> DENS> P-B-
AVE, P-B-MAX, P-B-MIN.
Use case When checking the independent operation at the replacement of
patch sensor/ITB or cleaning.
Adj/set/operate method Select the item and press the OK key.
Caution Be sure to execute this item after P-LED.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time 2 seconds
Related service mode COPIER> DISPLAY> DENS> P-B-AVE, P-B-MAX, P-B-MIN
P-OFFSET [Not used]
8
Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > MISC-P
8 Service Mode > COPIER > FUNCTION (Operation / Inspection Mode) > MISC-P
COPIER> FUNCTION> MISC-P
P-LED Light intensity adj of patch sensor
Lv.2 Details Adjust the light intensity of the patch sensor. (It is usually executed
automatically.)
The result is displayed under COPIER> DISPLAY> DENS> P-LED.
Use case When checking the independent operation at the replacement of
patch sensor or cleaning.
Adj/set/operate method Select the item and press the OK key.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time 2 seconds
Related service mode COPIER> DISPLAY> DENS> P-LED
2-HP HP detect of sec trans pressure release
Lv.2 Details Detect the HP to release the secondary transfer pressure.
The operation automatically stops after execution.
Use case To check the operation of home position detection at the time of
secondary transfer pressure release
Adj/set/operate method Select the item and press the OK key.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
2-HP-DES Disengaging secondary transfer assy
Lv.2 Details Manually disengage the secondary transfer external roller from the
ITB.
The operation automatically stops after execution.
Use case To forcibly disengage the secondary transfer external roller from the
ITB
Adj/set/operate method Enter the setting value and press the OK key.
Display/adjust/set range 0 or 1
0: Engagement, 1: Disengagement
SUB-SHDP [Not used]
SUB-SHDA [Not used]
RPT-FILE Report print file output
Lv.1 Details To generate various service report files and store in HDD. Files
stored in HDD can be obtained using PC to which SST has been
installed or USB memory device after starting the machine in
download mode.
Use case When obtaining the service report as a file instead of printing the
report out
Display/adj/set range None
8-227
T-8-57
8-227