Canon imagePRESS 1135 Series Service Manual page 1320

COPIER> COUNTER> DB1-SW
DL-BLT1 Swtch dspl: Delv decurlr belt unit1 PTcntr
Lv.1 Details Set whether or not to display the delivery decurler belt unit 1 in the
list of parts to be replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> DL-BLT1
DL-BLT2 Swtch dspl: Delv decurlr belt unit2 PTcntr
Lv.1 Details Set whether or not to display the delivery decurler belt unit 2 in the
list of parts to be replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> DL-BLT2
DUP-BLT Swtch dspl: Duplx decurlr belt unit PTcntr
Lv.1 Details Set whether or not to display the duplex decurler belt unit in the list
of parts to be replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> DUP-BLT
8
Service Mode > COPIER > COUNTER > DB1-SW
8 Service Mode > COPIER > COUNTER > DB1-SW
COPIER> COUNTER> DB1-SW
CLN-BRSH Switch dspl: Cleaning brush parts counter
Lv.1 Details Set whether or not to display the 4 cleaning brushes in the list of
parts to be replaced under the operator maintenance mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DBRL-1> CLN-BRSH
8-377
T-8-94
8-377