Canon imagePRESS 1135 Series Service Manual page 1330

■ CLN-SW
COPIER> COUNTER> CLN-SW
DP-GRS-A Switch dspl: dust preventn glass cln cntr
Lv.1 Details Set whether or not to display the dust prevention glass in the list of
parts to be cleaned under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the cleaning parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> CLEANING> DP-GRS
AR-FIL Switch dspl: Dust prevntn filter cln cntr
Lv.1 Details Set whether or not to display the dust prevention filter in the list of
parts to be cleaned under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the cleaning parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> CLEANING> AR-FIL
FIX-U Switch dspl: Fixing assembly clean countr
Lv.1 Details Set whether or not to display the fixing assembly in the list of parts to
be cleaned under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the cleaning parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> CLEANING> FIX-U
8
Service Mode > COPIER > COUNTER > CLN-SW
8 Service Mode > COPIER > COUNTER > CLN-SW
COPIER> COUNTER> CLN-SW
FD-U-1 Switch dspl:Feed assy clean countr (200K)
Lv.1 Details Set whether or not to display the feed assembly in the list of parts to
be cleaned under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the cleaning parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> CLEANING> FD-U-1
FD-U-2 Switch dspl:Feed assy clean countr (500K)
Lv.1 Details Set whether or not to display the feed assembly in the list of parts to
be cleaned under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the cleaning parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> CLEANING> FD-U-2
8-387
T-8-98
8-387