Canon imagePRESS 1135 Series Service Manual page 1499

10) Remove the 2 flat cables [1] from the connectors [2].
11) Remove the 4 cable clips [3].
CAUTION: Points to note when removing
Before plugging in the connector [3], secure the flat cables [1] with the cable clips [2].
[1] [2]
x2
[1]
x4
[3]
9
Installation > Cassete Heater-32 > Installation Procedure (Connecting to Host Machine) > Removing the Paper Deck Unit
[3]
[2]
F-9-168
[3]
[2]
F-9-169
9 Installation > Cassete Heater-32 > Installation Procedure (Connecting to Host Machine) > Removing the Paper Deck Unit
12) Remove the paper deck unit [1] to the direction of the arrow.
• 3 Screws [2]
CAUTION: Points to note when removing the unit
Fit the 2 cut-offs [2] of the paper deck unit [1] to the 2 hooks [3] on the guide rails.
[1]
[2]
[3]
x3
[2]
[1]
9-82
[3]
F-9-170
[2]
F-9-171
9-82