Canon imagePRESS 1135 Series Service Manual page 1317

COPIER> COUNTER> PD1-SW
FILTER Switch dspl: Filter counter
Lv.1 Details Set whether or not to display the following filters in the list of parts to
be replaced under the operator maintenance mode.
• 2 fixing ozone filters
• Primary charging ozone filter
• 2 fixing toner filters
• Primary charging toner filter
• Developing toner filter
When it is selected to display the filters and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> PRDC-1> OZ-FIL1, OZ-FIL2, TN-FIL1, TN-
FIL2, TN-FIL3
PRM-U-A Switch dspl: Primary charging assy countr
Lv.1 Details Set whether or not to display the primary charging assembly in the
list of parts to be replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> PRM-UNIT
PRE-W-U Switch dspl: Pre-pri trns chrg assy cuntr
Lv.1 Details Set whether or not to display the pre-primary transfer charging
assembly in the list of parts to be replaced under the operator
maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> PO-UNIT
8
Service Mode > COPIER > COUNTER > DB1-SW
T-8-93
8 Service Mode > COPIER > COUNTER > DB1-SW
■ DB1-SW
COPIER> COUNTER> DB1-SW
2TR-ROLA Switch dspl: Sec trns ex-roller prts cntr
Lv.1 Details Set whether or not to display the secondary transfer external roller
in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> 2TR-ROLL
FX12UP-A Switch dspl: Fixing roller parts counter
Lv.1 Details Set whether or not to display the fixing roller in the list of parts to be
replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-UP-RL
FX-WEB-A Switch dspl: Fixing web parts counter
Lv.1 Details Set whether or not to display the fixing web in the list of parts to be
replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-WEB
8-374
8-374