Canon imagePRESS 1135 Series Service Manual page 1178

COPIER > OPTION > FNC-SW
GSM-MAX Set max. paper weight: fixing mixed mode
Lv.1 Details To set the maximum paper weight to which fixing mixed mode is
applied when media (except special papers) are mixed.
Control temperature is not switched even papers which weights are
larger than the setting value.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 64 to 300
Unit g/m2
Default value 80
Related service mode COPIER> OPTION> IMG-FIX> FIXMIXBD
COPIER> OPTION> FNC-SW> GSM-MIN
GSM-MIN Set min. paper weight: fixing mixed mode
Lv.1 Details To set the minimum paper weight to which fixing mixed mode is
applied when media (except special papers) are mixed.
Control temperature is not switched even papers which weights are
smaller than the setting value.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 64 to 300
Unit g/m2
Default value 80
Related service mode COPIER> OPTION> IMG-FIX> FIXMIXBD
COPIER> OPTION> FNC-SW> GSM-MAX
MEAP-PRI Setting of MEAP task priority
Lv.2 Details Selecting ON increases MEAP task priority.
Use case To improve processing performance of MEAP.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
CNTR-SW Set of parts counter replacement timing
Lv.1 Details To set the estimated life of the parts counter.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Do not use this at the normal service.
Display/adj/set range 0 to 1
0: 50 sheets intermittent, 1: 100 sheets intermittent
Default value USA:1, Countries other than USA: 0
ILSZ-JAM Size-mismatch JAM detection ON/OFF
Lv.2 Details ON/OFF setting for size-mismatch JAM detection.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > FNC-SW
COPIER > OPTION > FNC-SW
W/RAID Setting of RAID board installation
Lv.1 Details Setting for installation condition of RAID board (HDD mirroring
kit-A1).
Select 1 (installed) when installing the RAID board. Select 0 (not
installed) when removing the RAID board.
Use case When installing/removing RAID board.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Not installed, 1: Installed
Default value 0
PSWD-SW Password type set to enter service mode
Lv.1 Details Setting the type of password that is required to enter when getting
into Service Mode.
2 types are available: one for "service technician" and the other for
"system administrator + service technician".
When selecting the type for "system administrator + service
technician", enter the password for service technician after the
password entry by the user's system administrator.
Use case Upon request from the user with tight security concern
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: No password, 1: Service technician, 2: System administrator +
service technician
Default value 0
SM-PSWD Password setting for service technician
Lv.2 Details Setting password for service technician that is used when getting into
service mode.
Use case If password is required when getting into service mode.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Be sure to select 1 or 2 with PSWD-SW in advance.
Display/adj/set range 1 to 99999999
Related service mode COPIER> OPTION> FNC-SW> PSWD-SW
8-235
8-235