Canon imagePRESS 1135 Series Service Manual page 1217

■ NETWORK
COPIER > OPTION > NETWORK
RAW-DATA Setting of received data print mode
Lv.2 Details Setting of print mode for the received image data.
To separate (identify) the cause to identify whether it's due to image
data or image processing in the case of trouble with received image.
Use case In the case of trouble with received image.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Caution Be sure to set back the value to 0 (normal print operation) after
recovering from the trouble.
Display/adj/set range 0 to 1
0: normal print operation, 1: print with original data without image
processing
Default value 0
RMT-LANG Language setting of remote UI
Lv.2 Details Setting the language on remote UI.
Use case Upon request from the user
Adj/set/operate method 1) Switch with +/- key, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range ja/en/de/fr/it/es
ja: Japanese, en: English, de: German, fr: French, it: Italian, es:
Spanish
IFAX-LIM Nmbr of max print line at IFAX reception
Lv.2 Details Setting of the maximum number of lines for e-mail text to be printed
when receiving IFAX.
Setting of this item can prevent endless printing of the attached file
data in the case of receiving an error e-mail or failure in interpretation
of the context.
Selecting 0 prints the header/footer in 1 sheet when receiving e-mail
without attached file but the e-mail text only.
Use case To prevent endless print in the case of failure in reception.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 999
0: No print of e-mail body, 999: unlimited
Default value 500
SMTPTXPN Setting of SMTP send port number
Lv.2 Details Setting of SMTP transmission port number.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 65535
Default value 25
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > NETWORK
COPIER > OPTION > NETWORK
SMTPRXPN SMTP reception port number setting
Lv.2 Details Setting of SMTP reception port number.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 65535
Default value 25
POP3PN POP3 reception port number setting
Lv.2 Details Setting of POP3 reception port number.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 65535
Default value 110
RUI-DSP Disp/hide copy functn option on remoteUI
Lv.2 Details Setting to display/hide copy function option on remote UI (to support
disability law)
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (display), 1: Display
Default value 0
FTPTXPN Specifying SEND port (FTP) number
Lv.1 Details Specifying address port (FTP) number for SEND.
Use case Upon request from the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 65535
Default value 21
NW-SPEED Setting of network data transfer speed
Lv.2 Details Setting of data transmission speed when connecting to the network
for service.
Normally there is no problem with selection of 0 when downloading
firmware through network. Change the mode in the case of fixing the
mode for 100Base-TX/10Base-T for any reason.
Use case To fix the communication speed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 2
0: automatic, 1: 100Base-TX, 2: 10Base-T
Default value 0
8-274
8-274