Canon imagePRESS 1135 Series Service Manual page 1262

COPIER> OPTION> LCNS-TR
ST-PSPCL Install state dspl of PS/PCL function
Lv.2 Details To display installation state of PS/PCL function when transfer is
disabled.
Use case When checking whether PS/PCL function is installed
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSPCL.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PSPCL Transfer license key dspl of PS/PCL func
Lv.2 Details To display transfer license key to use PS/PCL function when transfer
is disabled.
Use case • When replacing HDD
• When replacing the device
Adj/set/operate method 1) Select ST-PSPCL.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCL.
Display/adj/set range 24 digits
ST-PCLUF Install state dspl of PCL/UFR II function
Lv.2 Details To display installation state of PCL/UFR II function when transfer is
disabled.
Use case When checking whether PCL/UFR II function is installed
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PCLUF.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PCLUF Trns license key dspl of PCL/UFR II func
Lv.2 Details To display transfer license key to use PCL/UFR II function when
transfer is disabled.
Use case • When replacing HDD
• When replacing the device
Adj/set/operate method 1) Select ST-PCLUF.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PCLUF.
Display/adj/set range 24 digits
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > LCNS-TR
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > LCNS-TR
COPIER> OPTION> LCNS-TR
ST-PSLIP Install state dspl of PS/LIPS4 func: JP
Lv.2 Details To display installation state of PS/LIPS4 function (JP only) when
transfer is disabled.
Use case When checking whether PS/LIPS4 function (JP only) is installed
Adj/set/operate method 1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSLIP.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PSLIP Trns license key dspl of PS/LIPS4 func:JP
Lv.2 Details To display transfer license key to use PS/LIPS4 function (JP only)
when transfer is disabled.
Use case • When replacing HDD
• When replacing the device
Adj/set/operate method 1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSLIP.
Display/adj/set range 24 digits
ST-PSPCU Install state dspl of PS/PCL/UFR II func
Lv.2 Details To display installation state of PS/PCL/UFR II function when transfer
is disabled.
Use case When checking whether PS/PCL/UFR II function is installed
Adj/set/operate method 1) Select ST-PSPCU.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is
displayed under TR-PSPCU.
Display/adj/set range When operation finished normally: OK!
Default value 0
TR-PSPCU Trns lcns key dspl of PS/PCL/UFR II func
Lv.2 Details To display transfer license key to use PS/PCL/UFR II function when
transfer is disabled.
Use case • When replacing HDD
• When replacing the device
Adj/set/operate method 1) Select ST-PSPCU.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCU.
Display/adj/set range 24 digits
8-319
8-319