Canon imagePRESS 1135 Series Service Manual page 1252

■ CST
COPIER> OPTION> CST
U1-NAME Dspl/hide of PP name in PPsize group U1
Lv.2 Details Setting to display/hide paper name that is detected with paper size
group U1.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
U2-NAME Dspl/hide of PP name in PPsize group U2
Lv.2 Details Setting to display/hide the paper name that is detected with paper
size group U2.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
U3-NAME Dspl/hide of PP name in PPsize group U3
Lv.2 Details Setting to display/hide the paper name that is detected with paper
size group U3.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
U4-NAME Dspl/hide of PP name in PPsize group U4
Lv.2 Details Setting to display/hide the paper name that is detected with paper
size group U4.
Use case Upon request from the user.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: Hide (no display), 1: Display
Default value 0
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CST
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > CST
COPIER> OPTION> CST
U-SZ-SW ON/OFF of overseas specl ppr select dspl
Lv.1 Details To set whether to display Additional Standard Size Settings screen
(Additional Functions> System Settings> Additional Standard Size
Settings).
When 1 is set, the specified additional standard size is displayed on
Selecting the Paper Size screen (Additional Functions> Common
Settings> Register Paper > Selecting the Paper Size).
Use case When using the additional standard size paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Additional Functions> Common Settings> Register Paper> Selecting
the Paper Size
8-309
T-8-74
8-309