Canon imagePRESS 1135 Series Service Manual page 1241

COPIER > OPTION > USER
DK4-BSTP Float fan stop set in POD lowr deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the POD lower deck. Make a setting
of "after how many seconds the fan is turned off when the timing of
the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK1-BSTP to DK3-BSTP, DK5-BSTP
to DK10BSTP
DK5-BSTP Float fan stop set in POD2 upr deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the tandem POD upper deck. Make
a setting of "after how many seconds the fan is turned off when the
timing of the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK1-BSTP to DK4-BSTP, DK6-BSTP
to DK10BSTP
DK6-BSTP Float fan stop set in POD2 mid deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the tandem POD middle deck. Make
a setting of "after how many seconds the fan is turned off when the
timing of the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK1-BSTP to DK5-BSTP, DK7-BSTP
to DK10BSTP
8
Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
8 Service Mode > COPIER > OPTION (Mechanical specifications Setting Mode) > USER
COPIER > OPTION > USER
DK7-BSTP Float fan stop set in POD2 low deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the tandem POD lower deck. Make
a setting of "after how many seconds the fan is turned off when the
timing of the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK1-BSTP to DK6-BSTP, DK8-BSTP
to DK10BSTP
DK8-BSTP Float fan stop set in POD3 upr deck oprn
Lv.1 Details Turn off the paper separation fan when an image formation request
was not made even after the timing of the request has elapsed
during continuous operation of the second tandem POD upper deck.
Make a setting of "after how many seconds the fan is turned off when
the timing of the request has elapsed".
Use case Change the setting value to change the time until turning off the
paper separation fan which has been operating continuously.
Adj/set/operate method 1) Enter the setting value and press the OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 20
Unit 1 second
Default value 20
Related service mode COPIER> OPTION> USER> DK1-BSTP to DK7-BSTP, DK9-BSTP
to DK10BSTP
8-298
8-298