Canon imagePRESS 1135 Series Service Manual page 1319

COPIER> COUNTER> DB1-SW
FX-UP-BR Swtch dspl: Fixing rollr bearng prts cntr
Lv.1 Details Set whether or not to display the drum cleaning unit in the list of
parts to be replaced under the operator maintenance mode.
When it is selected to display the unit and the counter value reached
the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-UP-BR
FX-IN-BS Swtch dspl: Fix rollr inslt bush prts cntr
Lv.1 Details Set whether or not to display the 2 fixing roller insulating bushes
in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-IN-BS
FX-LW-BS Swch dspl: Prss rollr inslt bush prts cntr
Lv.1 Details Set whether or not to display the 2 pressure roller insulating bushes
in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-LW-BS
8
Service Mode > COPIER > COUNTER > DB1-SW
8 Service Mode > COPIER > COUNTER > DB1-SW
COPIER> COUNTER> DB1-SW
FX-LW-BR Swtch dspl: Press roller bearing prts cntr
Lv.1 Details Set whether or not to display the 2 pressure roller bearings in the list
of parts to be replaced under the operator maintenance mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-LW-BR
FX-UCLW Switch dspl: Fix rollr sprt claw prts cntr
Lv.1 Details Set whether or not to display the 4 fixing roller separation claws
in the list of parts to be replaced under the operator maintenance
mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-UCLW
FX-LCLWU Swch dspl: Prss rllr sprt claw unit PTcntr
Lv.1 Details Set whether or not to display the 6 pressure roller separation
claw units in the list of parts to be replaced under the operator
maintenance mode.
When it is selected to display the units and the counter value
reached the specified value, it is also displayed in the caution list.
Use case To set whether or not to display the unit in the replacement parts list
under the operator maintenance mode
Adj/set/operate method 1) Enter the setting value and press OK key.
2) Turn OFF/ON the main power.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value Subject to the destination
Related service mode COPIER> COUNTER> DRBL-1> FX-LCLWU
8-376
8-376